Chinese market for industrial robots to grow

China’s market for industrial robots is estimated to rise to $1.3 billion in 2017.

01/06/2014


China’s market for industrial robots is estimated to rise 10 percent from $810.4 million in 2012, according to a new report from IHS.

An estimated more than 29,000 industrial robots were sold in China in 2012, with unit shipments to increase by about 13 percent per year from 2013 to 2017, IHS said. By 2017, industrial robot unit shipments will reach more than 52,000 units. 

“The growth rate for revenue is less than that of unit shipments because of the expanding market, fierce competition and technical advances lead to the price erosion,” said Jay Tang, industrial automation analyst for IHS.

Articulated robots are the largest segment by robot type, accounting for 87 percent of the total market in 2012, and it is predicted to remain so through 2017. Most of these robots will be used for welding applications in the automotive sector.

From 2012 to 2017, revenues generated from selective compliance assembly robot arm (SCARA) robots are forecast to grow the fastest because the industries in which they are used are facing labor shortages and rising labor costs. Food and beverage, consumer electronics, and electronics/electrical are three of the most labor-intensive industries, and robots are being used more in these areas.

Some articulated robot suppliers, in particular, are entering these areas with high performance-price ratio and flexible products. SCARA robot suppliers will continue to dominate here because of their lower prices, as well as experience and industry knowledge.

Meanwhile, the market for linear robots is fragmented given the limited technology content of the machines and because of their low robot prices. Linear robots are used to do work including handling operations, simple assembly and simple machining. There are many market leaders in niche markets, including rubber and plastics, electronics and metal processing.

For their part, parallel robots are used to quickly pick up and assemble light payloads in the food/beverage/personal care and electronics industries. This market is very small and very few suppliers currently exist for this robot type.

Some international suppliers believe that parallel robots will be replaced by articulated types because the latter are getting faster. Still, establishing economies of scale here is difficult because the price of parallel robots is higher than that of other robots, even though some suppliers are developing new applications, such as polishing.

At the other end of the spectrum, the market for cylindrical robots is decreasing because of their limited dexterity. As articulated robot sizes and prices decrease, they offer greater dexterity at competitive prices. A further breakout for cylindrical robots is not included in the report covering the overall subject. 

Finally, for dual-arm robots, not many manufacturers have these machines available for commercial use, and no dual-arm robots were sold in China in 2012. IHS predicts that production of industrial robots in China will start with low-end applications, and as dual-arm robots are high-end products, they are unlikely to be produced from 2013 to 2017.

- Edited by Jessica DuBois-Maahs, Associate Content Manager, CFE Media, Plant Engineering, Control Engineering



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me