Chemical industry needs to cut hazards

The chemical industry lacks common practice protocols and understanding to identify safer processes, a new report said.

06/04/2012


ISS SourceThe chemical industry needs guidance in choosing alternative processing methods to reduce or eliminate hazards, a national panel said in a report released on May 11, 2012.

In the grand scheme of things, the U.S. Occupational Safety and Health Administration (OSHA) regulations require chemical companies to follow certain procedures to ensure manufacturing processes are safe. Having said that though, the report by the National Research Council (NRC) said the chemical industry needs better practices and understanding to identify safer processes.

It recommends the U.S. Chemical Safety Board or other entity develop a plan to help chemical plant managers choose alternative processes to reduce or eliminate hazards.

One method, known as an “inherently safer process” assessment, aims to minimize or eliminate a hazard. But the assessment does not always provide clear guidance. The report said switching to a non-flammable solvent in a process would remove a fire hazard. But if the solvent is toxic, then there is a new hazard.

Use of inherently safer process strategies would reduce the number of vulnerable areas around a company’s facilities, which would decrease the scope of emergency preparedness programs. But it potentially could narrow the focus too much and overlook certain outcomes, the report said.

Congress ordered the study following a 2008 explosion at BayerCropscience’s plant in Institute, WV, which killed two workers. The explosion occurred near a storage tank containing methyl isocyanate, a highly toxic chemical also known as MIC. The tank did not suffer damage and the chemical did not release.

Bayer took measures to reduce risks associated with MIC manufacturing and storage at the Institute plant. But the company did not incorporate all possible methods to control hazards, the report said.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me