CCD camera for scientific, astronomical imaging

Teledyne Dalsa unveiled its new CCD camera, QuantaPro2K camera at the SPIE Optics + Photonics trade show in San Diego.

08/25/2011


Teledyne Dalsa will showcase its multispectral, aerospace, IR and custom CCD and CMOS sensors and cameras at the upcoming SPIE Optics & Photonics trade show, located at the San Diego Convention Center in San Diego, California from August 21 to 25, 2011. In addition, the company will unveil its new large format low light imaging CCD camera, the QuantaPro 2K. The new CCD camera is ideal for astronomical, scientific, and medical imaging. SPIE Optics & Photonics, the largest inter-disciplinary technical conference in North America, features the latest research and technologies in solar, nano, optics, photonics, and space optics.

"The new QuantaPro 2K is an affordable solution for a range of scientific applications," said Behnam Rashidian, senior product manager at Teledyne Dalsa. "With its high sensitivity thermoelectric cooled full frame technology, the camera is designed for low light conditions and long integration times."

Through the use of a front illuminated device, the quantum efficiency (QE) approaches that of back illumination, reaching a peak QE of 70%. In addition, the single output format running at 10MHz allows for higher frame rates without the complications of multi-output tap matching.

Features and benefits of the QuantaPro 2K include:

  • Internal cooling to -35 C with anti-fog feature
  • Large 5 cm x 5 cm format with highly sensitive 24u pixels
  • GigE interface for convenience
  • Single output architecture
  • Low readout noise and dark current
  • No allowed column defects
  • Dark current reaches 0.1 e / pix / sec at -35 C
  • Linear 16 bit digitization provides dynamic range to 10000:1 (80 dB)

- Edited by Chris Vavra, Control Engineering, www.controleng.com

Machine vision applications and tutorials are available at

www.controleng.com/machinevision



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me