Can we do without nuclear power?

Can we, as some suggest, shut down some or all our nuclear power plants? What will make up for that lost generating capacity?

04/29/2011


Dear Control Engineering: After recent events in Japan, there are people calling for nuclear plants to be shut down forever. Is this even possible? Could we do without that much generating capacity?

One of the very practical considerations in the nuclear power controversy is if we can do without it. The answer to that question depends on where you are. World-wide, nuclear power generates about 14% of total output, but locally that number can vary drastically. France gets most of its power that way. The U.S. is more than 20%. More importantly, almost without exception, nuclear power plants are base loaded, meaning they run constantly at or near their capacity. Some plants modulate their output to reflect demand, but nukes run hard all the time. This means that any replacement technology has to be able to equal that.

Even the most enthusiastic anti-nuclear activists would be reluctant to suggest that coal-fired plants be built instead. There is the whole global warming thing and other classes of pollutants. Renewables are difficult if not impossible to use for base loading. So what is the alternative? Arguably the only practical one is natural gas.

If there is any country that has a high likelihood of actually shutting down its nuke plants, it’s Germany. The political climate there certainly points in that direction. A recent report by Deutsche Bank cited in The Economist reasons if Germany shut down all its reactors, it would have to build about 23,000 MW of new gas-fired capacity for base loading. That’s a lot, but not out of the question. Think of it as about a dozen two-unit plants. So where will all that gas come from? As it turns out, there is capacity in Europe and Russia that was developed to service the U.S. However, with our growing domestic production, we aren’t importing as much as we used to, so that output can be repurposed. Of course Germany’s annual carbon dioxide emissions will increase by several hundred million tons in the process. That’s far lower than it would be for coal, but it still isn’t free.

Peter Welander, pwelander@cfemedia.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me