Can a supervisor be too goal oriented?

Plant Engineer Gordon Beasley was growing concerned over the number of gripes and grievances emanating from Project Supervisor Ron Corwin's section in recent months. He asked Dave Runyan, his assistant, to look into it. Runyan blew out his cheeks.


Plant Engineer Gordon Beasley was growing concerned over the number of gripes and grievances emanating from Project Supervisor Ron Corwin's section in recent months. He asked Dave Runyan, his assistant, to look into it.

Runyan blew out his cheeks. "Ron's one of the most technically qualified supervisors in the department."

"I know he is. So why all the beefs?"

Good question, and a tough one to research. Runyan kicked it off with an informal chat with Corwin which yielded little more than frustration. Ron Corwin was as conscientious as they came; he was also a stiff and formal man.

"My responsibility," he told Runyan, "is to get the job done right and on time. Unfortunately, not everyone conforms to the same high standards."

Runyan nodded thoughtfully. "Thanks, Ron. Mind if I talk with some of your people?"

"Not at all. Why should I mind?"

He was back to square one, or was he? The assistant plant engineer next conducted discreet interviews with a few key men in Corwin's section. They were reluctant to say anything that might be construed as derogatory, but Corwin assured them his objective wasn't to lay blame, but to make the job more pleasant, harmonious, and productive for all parties involved.

It wasn't easy, but to a man two viewpoints appeared to prevail.

1. Corwin was tops from a technical standpoint, conscientiously goal-driven. For this he earned his peoples' respect.

2. From a personal and human standpoint, he didn't rate so well. He was often brusque, and lacked interest in subordinates' problems and welfare.

Armed with this information, Runyan reported back to his boss.

Question : In the plant engineer's place, how would you deal with this problem?

Beasley's strategy: Plant Engineer Gordon Beasley summoned Corwin to his office and asked him point blank: "Ron, what constitutes an effective manager?"

The project supervisor knew why he'd been summoned. "Getting the job out on time and maintaining high quality standards in the process."

Beasley smiled. "I couldn't agree more. Goal-orientation is a critical attribute and I won't underrate it. But people-orientation is equally important, human compassion and personal interest in one's subordinates. You score very high as a goal, or production, oriented manager. What I'd like you to do now is take a closer look at yourself as a people- oriented manager. Do you see what I'm getting at?"

Corwin was no fool. "Yes, I do."

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me