Camera viewer links to I2C bus of USB, GigE cameras
IDS offers a convenient and fast way to perform simple tests on image processing hardware expansions.
Imaging Development System (IDS) offers a convenient, fast and simple way to test the image processing hardware expansions for uEye camera models with I2C connections that are connected to the bus.
The software tool's graphical interface now offers direct access to I2C commands. This allows hardware tests to be performed independent of the software, earlier and with minimal effort. The functionality of e.g. in-house developments such as lighting control, motors and A/D converters, can now be quickly and easily tested without programming effort.
In addition, all model-specific parameters of the camera are provided in a graphical interface in the camera viewer. Arriving at ideal settings is therefore possible without programming a single line of code, simplifying the process of incorporating the best possible parameters into the actual imaging processing application by saving them in an INI file.
- Edited by Gust Gianos, Control Engineering, www.controleng.com
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.