Booming market for touch-screen notebook PC displays hits speed bump in second quarter

Shipments for touch-screen panels for notebook PCs were down 4.9 percent in the second quarter for 2013, though the overall outlook for 2013 remains positive.

10/03/2013


How bad were conditions in the notebook PC market during the second quarter?

So bad that that even the red-hot segment of display panels for touch-screen mobile PCs suffered a sequential decline during the period, according to a new report entitled “Touch Panel Shipment Database – Notebook PC – Q3 2013,” published by IHS (NYSE: IHS), a leading global source of critical information and insight.

Shipments of touch-screen panels for notebook PC amounted to 4.4 million units in the second quarter of 2013, down 4.9% from 4.6 million in the previous quarter, as presented in the attached figure. Up until the second quarter, shipments of these panels had been skyrocketing, rising by 52% in the first quarter, by nearly 3,000% in the fourth quarter of 2012 and by 222% in the third quarter of 2012.

Despite the sequential decline, the nascent market for notebook touch screens still is expanding explosively on a year-over-over basis, with shipments surging to 8.9 million units in the first half of 2013, up from a mere 53,000 in the first half of 2012.

“The touch-screen notebook market stalled in the second quarter, reflecting generally terrible conditions in the mobile PC segment,” said Duke Yi, senior manager for display components and materials research at IHS. “Shipment growth also was impacted as PC makers prepared new models for introduction in the second half of 2013. The good news for the market is that sequential growth is forecast to recover in the second half, traditionally the peak season for PC product sales, following launches of new product lineups.”

Second-quarter blues

Worldwide shipments of all types of mobile PCs—including both conventional and touch-screen models—shrank a steep 5.1% during the April to June period compared to the first three months of the year. This represented the first time the notebook PC market experienced a sequential decline since the second quarter of 2002, during the dot-com bust. The mobile PC industry this time faced tough competition from media tablets, depressing sales.

Area reprieve

While unit shipments declined in the second quarter, the market for notebook PC touch screens actually expanded based on another growth metric: panel area. Mobile PC touch-screen-panel shipments measured in terms of square inches rose by 3.4% in the second quarter compared to the first. This indicates that display sizes for touch-screen notebooks are expanding.

Shipments for touch-screen panels for notebook PCs were down 4.9 percent in the second quarter for 2013, though the overall outlook for 2013 remains positive. Courtesy: IHS Inc.

Notebook touch panels sized 11.6 inches or smaller accounted for 36.8% of total shipments in the second quarter, down from 52.7% during the previous quarter. Meanwhile, combined shipments of 13.3- , 14- , and 15.6-in. laptop touch panels, which have emerged as the mainstream sizes, jumped to 57.1% of the total market, up from 40.1% in the first quarter.

Price plunge

Although touch-panel shipments by area increased quarter-on-quarter, prices of touch panels fell significantly amid intensifying competition. The average selling price of laptop touch panels dropped more than 10%, despite growing demand for larger touch-screen panels.

Meanwhile, the utilization of low-end technologies has been on the rise. For example, the use of sodalime for the cover glass of a notebook touch panel has increased, replacing aluminosilicate, which made up 35.7% of the cover-glass market in the second quarter, down from 65.7% in the previous quarter.

The growing adoption of low-end technologies in the notebook PC sector indicates ongoing efforts in the market to cut touch-panel costs while expanding touch-screen notebook PC displays to be as large as those used in conventional notebook PCs. 

Happy as a clamshell

Traditional clamshell PCs in the second quarter accounted for 75% of total touch-screen notebooks, up from 58% during the same period in 2012. Meanwhile, the market share for high-end detachable-type touch-screen notebook PC fell to 11.5%, down from 23.7%. Development costs for clamshell notebooks are lower than those of other form factors, prompting greater participation from PC makers.

Amid increasing competition, display supplier TPK Holding Co. from Taiwan lost share during the second quarter in the notebook PC touch-screen panel market. The company’s share of market dropped to less than 50%. Meanwhile, AU Optronics Corp., also from Taiwan, and China’s Shenzhen O-Film Tech Co. posted rapid growth during the same period. Notebook PC makers on the whole have been diversifying touch screen panel suppliers to reduce the prices of the panels.

The market for controller integrated circuits (ICs) used for the laptop touch screen panels was also hit by fierce competition. California-based Atmel Corp., which previously led the market, lost ground to Taiwan’s ELAN Microelectronics Corp. in the second quarter. Two other entities expanded their market share—Synaptics Inc., also of California; and eGalax-eMPIA Technology Inc., another Taiwanese maker.

- Edited by CFE Media. See other automation-related research.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Leaders Under 40 program features outstanding young people who are making a difference in manufacturing. View the 2013 Leaders here.
The new control room: It's got all the bells and whistles - and alarms, too; Remote maintenance; Specifying VFDs
2014 forecast issue: To serve and to manufacture - Veterans will bring skill and discipline to the plant floor if we can find a way to get them there.
2013 Top Plant: Lincoln Electric Company, Cleveland, Ohio
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Bring focus to PLC programming: 5 things to avoid in putting your system together; Managing the DCS upgrade; PLM upgrade: a step-by-step approach
Balancing the bagging triangle; PID tuning improves process efficiency; Standardizing control room HMIs
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.