Beyond the 'break-fix’ mentality is a smarter, safer workplace

Hesh Kagan, the 'Wizard of Wireless,’ was in our offices last month chatting about some new initiatives on sensors. The talk turned to low-cost sensors that would bring the cost of predictive maintenance down to the level where it was cheaper to measure equipment than to simply wait for it to break.

07/15/2007


Hesh Kagan, the 'Wizard of Wireless,’ was in our offices last month chatting about some new initiatives on sensors. The talk turned to low-cost sensors that would bring the cost of predictive maintenance down to the level where it was cheaper to measure equipment than to simply wait for it to break.

A 'break-fix’ mentality, Kagan said, is the maintenance standard at most process facilities %%MDASSML%% a fairly provocative position to take. Given the squeeze in capital costs, most industry experts are quick to point out that stretching the useful life of plant floor equipment is necessary to ensure profitable operations. Yet, Kagan contends the equipment is viewed in many facilities as easier to replace than it is to monitor and maintain.

If he’s right, how quickly can we outsource that kind of thinking to another country? We don’t need it here.

PLANT ENGINEERING ’s readers were asked about this issue as part of the “Changing Role of the Plant Engineer” study. The preliminary results will be released later this month at Maximo World in Orlando. They tell an interesting story. Asked what’s the most important factor affecting their business, reducing maintenance costs ranked fourth. Driving safe and secure operations, gratefully, came in first.

Still, it’s worth observing that in many facilities, maintaining people and maintaining equipment is viewed in much the same light %%MDASSML%% and it’s likely a pretty dim light at that. Machines break down and are replaced. Humans break down as well, victims of workplace injuries and unsafe work conditions, and are seen by a few plant managers and plant executives as just as interchangeable as your average gear.

In general, the U.S. workplace is safer. Every OSHA statistic shows it. Yet there are still too many facilities %%MDASSML%% especially in labor-intensive and salary-challenged jobs %%MDASSML%% where the attitude toward workers is the same as equipment %%MDASSML%% 'break-fix.’

Enlightened managers know better, of course. With our hard-fought experience in manufacturing leaking out the door through retirement %%MDASSML%% and showing little signs of being replaced %%MDASSML%% plant managers need every bright mind and every experienced hand to keep productivity high. Treating any worker as a human cog isn’t just dangerous and inhumane, it’s also stupid.

Lean manufacturing, as we discuss extensively in this issue, is a smart way to put your plant floor on the road to productivity. Quality and safety are the marriage of good equipment and good work processes. Quality and safety are measures we equate to a well-run business. You don’t need a sensor. You just need some sense.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me