Balluff metal-mount radio frequency identification
A new Balluff direct metal-mount or "M-M" radio frequency identification system allows the RFID tag to be mounted on any alloy or metal surface without typical interference or loss in range.
A new Balluff direct metal-mount or “M-M” RFID (radio frequency identification) system is designed to provide tough industrial track-and-trace capability to any manufacturing, assembly or closed-loop logistics process. The Balluff non-contact, ISO 15693 compliant passive data carrier technology allows the RFID tag to be mounted on any alloy or metal surface without typical interference or loss in range.
The tags offer a range of 52 to 65 mm regardless of the alloy content of the metal, including aluminum, which tends to cause the most loss in range for passive RFID, company says. These new tags are contained in a robust, compact housing to allow flexible mounting and sustainability.
Designed to operate in temperatures ranging from -25
Two industrial head options are designed for maximum read/write performance. One is a self-contained processor and read/write head with a built-in RS-232 serial interface. The other is a read/write head the same housing and it can be connected to any of Balluff’s several remote processors. Using a remote processor expands the communication options to include DeviceNet, Profibus, Ethernet/IP and TCP/IP, Modbus-IP, or
Tags can be mounted directly on metal pallets, totes, or even directly on parts without the use of plastic spacers, which minimizes complexity and reduces installation costs while providing consistent and reliable read/write performance.
- Edited by Mark T. Hoske , editor in chief
Control Engineering News Desk
Register here to select your choice of free eNewsletters .
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.