Bad back: Can he refuse a lifting chore?

Maintenance Foreman Foster Perkins wasn't entirely displeased when Utility Worker Vince Borelli refused an order to stack several 40-lb electrical units on a 5-ft-high shelf. "My back's been acting up," Borelli explained.

07/01/1998


Maintenance Foreman Foster Perkins wasn't entirely displeased when Utility Worker Vince Borelli refused an order to stack several 40-lb electrical units on a 5-ft-high shelf.

"My back's been acting up," Borelli explained. "This assignment could get me in trouble."

Perkins didn't believe him. On top of that, Borelli was a marginal worker with a poor attitude at best. Perkins figured, this could be just the opportunity he needed to get rid of him.

"Bad back! That's the most popular excuse I know to get out of work," the foreman replied.

"You don't have to take my word for it; I can get you a note from my doctor. I'm under treatment for my back."

"I don't have time to argue with you," Perkins said. "Either do what you're told, or clock out and take the consequences."

"What consequences?"

"Figure it out for yourself. Failing to follow an order is insubordination. It could cost you your job."

Borelli decided his health was more important than his job. He persisted in his refusal to lift the motors, and clocked out as he had been instructed.

Perkins returned to his desk and typed up a termination notice.

Question : How do you rate Perkins' chances of getting away with firing Borelli for insubordination?

Stryker's decision: When the foreman presented the notice to his boss for approval, Plant Engineer Herman Stryker asked, "What effort did you make to check Borelli's contention that he has a back problem? Did you send him to the nurse?"

"No. I didn't believe him for a minute. He's a lousy worker and lazy in the bargain. Back trouble is the standard excuse some of these guys use to get out of jobs they don't like."

"That may be so in this case. On the other hand, you may be wrong. If Borelli does have a legitimate back problem, his refusal to lift heavy units is reasonable and sensible. Keep in mind too that the quality of his work performance and attitude isn't the issue in this case. Your first responsibility is the safety and well-being of your people. It was your obligation to determine as best you can whether or not Borelli's health claim was valid. If it is, he's not guilty of insubordination. If you wish to fire him for unsatisfactory performance, this must be the basis of your termination notice."





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Leaders Under 40 program features outstanding young people who are making a difference in manufacturing. View the 2013 Leaders here.
The new control room: It's got all the bells and whistles - and alarms, too; Remote maintenance; Specifying VFDs
2014 forecast issue: To serve and to manufacture - Veterans will bring skill and discipline to the plant floor if we can find a way to get them there.
2013 Top Plant: Lincoln Electric Company, Cleveland, Ohio
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Bring focus to PLC programming: 5 things to avoid in putting your system together; Managing the DCS upgrade; PLM upgrade: a step-by-step approach
Balancing the bagging triangle; PID tuning improves process efficiency; Standardizing control room HMIs
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.