Avoid confrontation to break down disguises

We all wear masks on occasion in an effort to conceal our true motivations. As a manager, it helps to probe and see through these disguises.

09/01/1999


We all wear masks on occasion in an effort to conceal our true motivations. As a manager, it helps to probe and see through these disguises. But it can cause more harm than good if, in identifying a subordinate's motivations, we expose him head-on in direct confrontation.

In an Ohio engineering department, Project Manager Harvey Gault had been waiting for months for George Mellon, a project supervisor in a key spot in the operation, to voluntarily retire and break in a replacement. Again and again, he had expressed his intention to do so. But every time a replacement candidate was proposed, Mellon found some fault with him. Lacks experience, personality problem, doesn't have the training and background to handle the job. The situation dragged on from month-to-month because Mellon's cooperation and help in training his eventual replacement were important to the operation.

But the supervisor was becoming a disruptive influence is Gault's fast-growing group. Younger engineers charged that he kept stalling projects on one ruse or another. He had grown contrary and irritable. One exceptionally bright engineer, well qualified to step into Mellon's shoes, complained that his career was being dead-ended because of Mellon's refusal to step down. It had reached a point, Gault decided, where action was called for.

His initial inclination was to confront Mellon directly and bring the matter to a head once and for all. On second thought, he wisely decided to discuss the problem with his boss.

Question: What strategy would you suggest to bring about a harmonious transition in replacing Mellon?

Parker's solution: "We both know that Mellon's real reason for clinging to his job has nothing to do with our inability to find a qualified person to replace him," Plant Engineer Ben Parker told Gault.

The project manager nodded agreement. "I know. It's his fear of stepping down, letting go, his unwillingness or inability to give up his status and income for an empty and uncertain future."

"That's it in a nutshell. It's a fairly clear and obvious disguise. But confronting him with this reality directly would be counterproductive for both him and the department. However disruptive, Mellon is still productive and a valuable asset. Instead of demanding his immediate retirement I think he would welcome the chance to ease into it gradually. We might utilize his skills in a training or consulting capacity over a period of months while he remains active in coaching and counseling his replacement. Let's try to approach it that way."





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me