Attitude can be more important than aptitude

We don't recall the name of the psychologist who said it, but the above statement is true. Once people are mentally sold on an idea or perception, getting them to change can be tougher than growing hair on a billiard ball.


We don't recall the name of the psychologist who said it, but the above statement is true. Once people are mentally sold on an idea or perception, getting them to change can be tougher than growing hair on a billiard ball.

Such was the case when Technical Service Engineer Bill Hirtz got the notion into his head that the only way to accomplish boiler blowdown properly was the procedure he had described in a recently presented report. Matt Kessinger, his supervisor, explained briefly why in the particular case at hand, Bill's proposal wouldn't work. He asked him to revise his report accordingly.

Hirtz would have none of it. His method was firmly fixed in his head, his mind closed to alternatives.

"You're the boss," he told Kessinger. "I'll do what you want if you insist. But I don't agree with it."

Kessinger had considered Hirtz's proposal in depth. A mature and experienced professional, he felt he was right. Ordering the engineer to follow a procedure he didn't agree with ran against his grain. How could he convince Hirtz he was wrong?

Question : What would you do in Kessinger's place?

Cutler's strategy: The supervisor went to his superior for advice. Plant Engineer George Cutler smiled in response to Kessinger's exasperation over Hirtz's stubbornness in refusing to see things his way.

"Nothing is tougher to alter than a person whose attitude is set no matter what. There are two ways to approach the problem depending on the person's intelligence level. Smart people respond best to logic and reasoning. Not-so-smart people are better persuaded emotionally.

"Bill Hirtz is a bright guy. It may take patience to reach him, but I think your best bet is to sit down with him and explain with the facts and figures of the case why you feel he may have lost his objectivity. Who knows, once you start getting to the nuts and bolts involved, he may even convince you that he's right. But one way or other, I think it may produce the desired result."

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on creating and enhancing a safe workplace in manufacturing.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me