Asia goes green

The developing economies of Asia have been recognized for their manufacturing prowess. They have not, however, been known for adoption of sustainable, efficient practices. Recent actions indicate that this stance is changing.

07/01/2009


Attendees discussed new technologies at the "Energy Savings Made Easy" seminar in Singapore, which had a surprisingly large turnout.

Attendees discussed new technologies at the "Energy Savings Made Easy" seminar in Singapore, which had a surprisingly large turnout .

It has to be said that Asia has never exactly been on the cutting edge of the green movement. And with many of parts of the region–most notably India–still striving for a solid electrical supply infrastructure, it is Asia which will be seeing the bulk of deliveries of very un-green, coal-fired power stations in the next few years.

So on the evening of March 28, 2009, when 88 countries around the world participated in this year’s Earth Hour, and households and businesses

were encouraged to turn off lights and electrical appliances for one hour to raise awareness of climate change, it was both pleasing and interesting to see the Philippines rank at the top in Earth Hour’s global participation with an estimated 15 million citizens joining in the great switch-off and saving some 611 MWh of electricity in the process (equivalent to halting 12 coal-fired power plants). Even

Vietnam, where the average wage is around $100 a month, saw electricity demand fall by a respectable 140 MWh during the event.

A number of Asian government initiatives point to a new realization that, in the East, with energy consumption only set to increase over the coming years, a resolute focus on “energy efficiency” (i.e., using less energy to provide the same amount of heat, light, motion, etc.) is needed to mitigate spiraling costs and environmental impact.

For instance, South Korea, which is almost exclusively dependent on expensive imported fuel, recently announced that it will be switching every bulb in every public building to LED by the end of this year. It also aims to be the first country in the world to have a “smart grid” to maximize the efficiency of electricity transmission.

In Malaysia, where the overall energy demand is expected to increase at an average rate of 6.3% per year during the period of the government’s Ninth Malaysia Plan (2006-2010), the Malaysian Industrial Energy Efficiency Improvement Project has been developed to improve energy efficiency in the country’s industrial sector by removing barriers to the efficient use of energy.

And in Singapore this March, the National Environment Agency (NEA) recognized the first two “Energy Smart Retail Malls,” which had successfully implemented energy savings measures to achieve better energy efficiency and lower operating costs. One suburban mall managed to reduce its annual electricity consumption by some 1,200 MWh to realize an annual saving of US$167,000 and 610 metric tonnes in carbon dioxide emissions. In April, the NEA extended mandatory energy efficiency labeling to all refrigerators, air conditioners, and tumble dryers sold in the country.

Manufacturing takes an interest

But it is not just in the consumer-focused markets that Asia is getting greener. The “Energy Savings Made Easy” seminar in Singapore had an unexpectedly large turnout (more than 350 attendees). Organized by regional automation distributor TDS Technology, which represents global brands such as Mitsubishi Electric and GE Fanuc, as well as many homegrown Southeast Asian companies, this energy event showcased solutions such as variable speed drives, energy-efficient motors, and LED lighting systems.

Attracting particular interest at this event was 3T Hypermizer, a young Singapore company. Its product, Hypermizer, is an automatic power controller that supplies the right amount of voltage and current to the driven loads to function optimally. Hypermizer installation has significantly reduced the energy bill for companies such as Fuji Xerox, said CEO Ravinder Singh.

“We are confident that clients can achieve up to 35% energy cost savings,” Singh told Control Engineering Asia . While Hypermizer is currently only available in Asia-Pacific, Singh says he is “eyeing the U.S. and Europe markets, where energy-saving devices are likely to have a good reception.”

According to TDS Technology director Paul Yeo, the healthy attendance at its Energy Savings seminar is indicative of an increasing interest in how energy efficiency technologies can deliver a boost to the bottom line through reductions in metered consumption, which can only be welcome in these times of falling orders and shuttered manufacturing lines. Save money, save the planet. It’s quite an incentive—and Asia is starting to change its color in response.


Author Information

Bob Gill is the editor of Control Engineering Asia. He can be reached at Bob.Gill@rbi-asia.com .




No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
The true cost of lubrication: Three keys to consider when evaluating oils; Plant Engineering Lubrication Guide; 11 ways to protect bearing assets; Is lubrication part of your KPIs?
Contract maintenance: 5 ways to keep things humming while keeping an eye on costs; Pneumatic systems; Energy monitoring; The sixth 'S' is safety
Transport your data: Supply chain information critical to operational excellence; High-voltage faults; Portable cooling; Safety automation isn't automatic
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Maintaining low data center PUE; Using eco mode in UPS systems; Commissioning electrical and power systems; Exploring dc power distribution alternatives
Synchronizing industrial Ethernet networks; Selecting protocol conversion gateways; Integrating HMIs with PLCs and PACs
Why manufacturers need to see energy in a different light: Current approaches to energy management yield quick savings, but leave plant managers searching for ways of improving on those early gains.

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.