Arup Thoughts: Using smart grids for energy efficiency

A smart grid can support technology that helps consumers make the best use of their electricity by enabling them to use power in off-peak periods when it’s more readily available.

06/06/2014


Courtesy: ArupIf governments want us all to use energy more efficiently, I think they need to be much more active in fostering the rise of the smart grid.

Traditionally, the distribution network that carries electricity to people’s homes do not possess much intelligence. A smart grid, on the other hand, automatically gathers and acts on information to manage demand and any potential generation for optimum efficiency.

This means a smart grid can support technology that helps consumers make the best use of their electricity by enabling them to use power in off-peak periods when it’s more readily available, for example. Imagine if your fridge knew that it had to manage its own temperature and not turn on its compressors in a peak (more expensive) period?

An industrial customer could have systems that ensured core functions, such as an intensive care unit in a hospital – always had power while others turned themselves off when energy prices hit a certain level. This could enable them to save money, because it would open up the possibilities for contracts that gave them a rebate for this partial energy reduction.

Such demand-side management could make a small but significant difference to domestic and commercial consumers, and a big difference at a national level. The technology exists and I think there would be strong appetite for it from consumers keen to be empowered and in control of their own energy bills. But a smart fridge, toaster or even industrial machine needs to be connected to a smart grid to realize these benefits.

In Europe, feed-in tariffs that incentivize consumers to generate their own energy on a small scale will encourage energy companies to build smart grids. The challenge of managing the energy being fed back into the grid from small-scale installations, such as a few hundred watts of solar panels on someone’s home, requires such technology.

Elsewhere governments are looking at and testing smart grids to various degrees. For example, there is a general push to renewables, including massive solar and wind farms. But without smart grids, it will be hard to manage the intermittent renewable energy such projects generate and match it with demand.

So what needs to happen for smart grids to spread? I think governments need to define what they want to get from their grids and what their networks will look like. Some may want to encourage micro-generation and allow consumers to feed power back into the grid. Others may not want to do this and choose to focus instead on demand-side management.

However they want their grids to work for them, governments must back solutions that are adaptable and evolvable. The smart grids implemented now must work with the generation and demand-side management technology that comes along in the next few decades.

Grids will also have to be resilient, secure from cyber threats, and affordable. It’s a big ask for governments, with many of the costs up-front and the benefits realized in years to come. Politicians aren’t always renowned for their long-sightedness but I think it’s time for them to have some vision when it comes to smart grids.

Richard Hatton leads the East Asia power generation team based in Hong Kong. He has more than 20 years of experience as an electrical power engineer. This post originally appeared on Arup ThoughtsEdited by Brittany Merchut, Content Coordinator, CFE Media, bmerchut[at]cfemedia.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me