ARTPEC-4 and the industry

With a press release from Axis Communications announcing their latest generation ARTPEC-4 SoC, IMS Research ponders on what this means for the industry.


With a press release from Axis Communications announcing their latest generation ARTPEC-4 SoC, IMS Research ponders on what this means for the industry.

The release from Axis highlights the two key advantages of this new chip:

“...a powerful CPU and a coprocessor for accelerating video analytics.... boasts more processing power for intelligent video analytics.”

“...lower noise and higher light sensitivity for sharper images of moving objects”.

One of the inhibitors to “intelligent” edge devices has historically been the lack of processor resource for video analytics. With the rapid growth of HD and high megapixel network security cameras, much of the available processing resource within cameras has been prioritised for video compression/transmission purposes. The launch of Texas Instruments’ DVMA1 SoC in 2010 looked to address this with “a vision co-processor for smart analytics”. However, since its launch, edge-based analytics has yet to be widely embraced.

IMS Research believes the announcement from Axis could prove to be a turning point for edge-based video analytics as the leading manufacturer of network security cameras is seemingly looking to move (at least some) analytics to the edge. Furthermore IMS Research believes that other manufacturers will increasingly announce cameras with analytics onboard through 2012. Whilst analytics is still not an essential feature for most customer, it is an interesting differentiator and marketing tool, other manufacturers are likely to develop edge-based analytics capability to remain competitive.

IMS Research’s “Trends for 2012 - Video Surveillance Trends for the Year Ahead” paper also stated that there would be a renewed focus on image quality in 2012. HD and megapixel has been the focus of most manufacturers attentions’ over the last 24 months and this level of resolution is increasing becoming an expectation rather than a unique feature. To remain competitive, manufacturers will need to look at innovations beyond resolution. The release states that “ARTPEC-4 is the key to Axis’s Lightfinder technology”, enabling the capture of colour video in low light conditions. Having spoken with vendors in advance of our forthcoming report on the global video surveillance market, IMS Research believes that low light and wide dynamic range will be two big pushes for all camera manufacturers in 2012.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on creating and enhancing a safe workplace in manufacturing.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me