April 2011 manufacturing up from April 2010 nationally

AMT and AMTDA reports that manufacturing totaled almost $400 million nationwide, which is up almost 75 percent compared to 2010.

06/13/2011


April U.S. manufacturing technology consumption totaled $396.92 million according to AMT, The Association For Manufacturing Technology and AMTDA, the American Machine Tool Distributors’ Association. This total, as reported by companies participating in the USMTC program, was down 21.0% from March but up 74.9% when compared with the total of $226.99 million reported for April 2010. With a year-to-date total of $1,595.98 million, 2011 is up 105.3% compared with 2010.

These numbers and all data in this report are based on the totals of actual data reported by companies participating in the USMTC program.

“It is very encouraging to see year-to-date orders more than double last year’s pace particularly with the price of oil, unrest in the Middle East, and the disasters in Japan,” said Douglas K. Woods, President of AMT. “Despite April’s numbers being slightly lower than March, recent levels of outstanding order activity are now approaching pre-recession levels which is a positive long-term indicator for our industry.”

The United States Manufacturing Technology Consumption (USMTC) report, jointly compiled by the two trade associations representing the production and distribution of manufacturing technology, provides regional and national U.S. consumption data of domestic and imported machine tools and related equipment. Analysis of manufacturing technology consumption provides a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.

U.S. manufacturing technology consumption is also reported on a regional basis for five geographic breakdowns of the United States.

Northeast Region

At $58.26 million, April manufacturing technology consumption in the Northeast Region was down 24.8% when compared with the $77.43 million total for March but up 61.9% when compared with April a year ago. The year-to-date total of $240.64 million is 93.3% more than the comparable figure for 2010.

Southern Region

April manufacturing technology consumption in the Southern Region totaled $51.30 million, 12.8% more than March’s $45.47 million and 61.2% more than the April 2010 total. With a year-to-date total of $184.93 million, 2011 is up 49.7% when compared with 2010 at the same time.

Midwest Region

Midwest Region manufacturing technology consumption in April stood at $124.34 million, 39.5% less than the March total of $205.64 million but up 117.4% when compared with last April. At $554.39 million, the 2011 year-to-date total is 156.7% more than the comparable figure for 2010.

Central Region

Manufacturing technology consumption in the Central Region in April totaled $120.77 million, down 5.0% from March’s $127.14 million but up 64.0% when compared with the April 2010 figure. The $456.34 million year-to-date total is 112.6% higher than the total for the same period in 2010.

Western Region

Western Region manufacturing technology consumption totaled $42.25 million in April, 10.1% less than the $47.01 million total for March but 49.1% higher than the tally for April 2010. At $159.68 million, 2011 year-to-date is up 61.5% when compared with last year at the same time.

 - Edited by Chris Vavra, Plant Engineering, www.plantengineering.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me