Apple to build major fuel cell installation for data center

Green power for your iCloud application will come from natural gas and solar.

04/05/2012


Apple is building a new data center that will feature two cutting edge sustainable power schemes, photovoltaics and fuel cells. This in itself is interesting, but the fact that it is being built in North Carolina and not the left coast is particularly curious. (Full disclosure: My family and I own many Apple products and have been users since buying our first 512k Macintosh in 1985. I still have it. Don’t ask me why we thought we needed a computer back then.)

The initial plan for the site calls for a 4.8 MW fuel cell facility, which they are characterizing as the largest private (i.e., non-utility company) installation in the U.S. Bloom Energy is providing the solid oxide fuel cells (SOFCs) for the project that will be fueled with natural gas. This specific fuel cell technology is simple and very efficient (in fuel cell terms) but runs at high temperatures, usually in the 800 to 1,000 °C neighborhood, which normally limits it to larger stationary installations. At that temperature, natural gas can be reformed into hydrogen which the cell uses. The leftover carbon atom combines with atmospheric oxygen and goes out the stack as carbon dioxide. So, even if there is no combustion, there is a greenhouse gas aspect to it, albeit a small one in that the fuel cell produces more electricity per unit of natural gas than normal combustion technologies. Efficiencies of SOFCs are normally >60% even if you don’t capture the waste heat. (Read a Control Engineering article from 2007 on fuel cell technologies.)

I haven’t seen any indication if Apple plans on recovering the waste heat off the fuel cells. Given the high temperature of SOFCs, some installations have used a recovered heat boiler similar to those used in a combined-cycle gas turbine facility. If they aren’t using it to make steam, I’m not sure what you would do with that much heat at a giant server farm.

This project isn’t cheap, but if any company has the cash to undertake something on this scale, it’s Apple. Estimates suggest it will cost around $30 million for that generating capacity. However, once they’re past the initial cost, generating costs are very low and reliability is exceptionally high, hence its desirability for a data center. The next construction phase planned is a 20 MW photovoltaic installation, much larger than any other in the state.

Now, where did I put my iPad?



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me