Apple's problems and wireless instrumentation

07/16/2010


 Dear Control Engineering: It’s been interesting following some of the problems that Apple is having with its iPhone 4. Should I be concerned about similar reception difficulties with wireless instrumentation devices?

It’s difficult to compare a cell phone network and wireless instrumentation in a typical industrial plant, but some of the issues of one may be instructive for another. Apple’s situation is indeed interesting. Reports suggest the antenna on the new model 4 isn’t nearly as effective as had been hoped, and part of the problem is that some claim the company’s engineers knew this all along and management released the device anyway. Moreover, there are reports that the phone displays higher signal strength than it should. (Full disclosure: My family has three of the older model 3 iPhones and we generally seem fairly satisfied.)

Cell phones are different than wireless instrumentation devices for many reasons. Here are a few:

First, the phone has an intelligent operator: you. When you make a call, you have the ability to choose where you do it. You can avoid areas where coverage is poor, and if you lose a call, it probably isn’t the end of the world.

Second, designers create antennas to be portable and small, not necessarily for the best reception. It has to fit into your pocket.

Third, cell phone networks have hugely elaborate infrastructure systems.

If you are evaluating wireless instrumentation, in most cases you’re probably considering either WirelessHART or ISA100.11a devices. In many respects these are very similar, at least insofar as radio propagation is concerned.

When creating wireless networks, you can survey your plant and determine how communication is likely to operate. This includes identifying interference sources, obstacles, etc. Since a wireless pressure sensor can’t move itself to a better location, it has to work where it is. You will place your gateways where they can do the most good.

While the device is bolted down, the network can change the way it communicates if necessary. Both systems have capabilities built in that allow a device to re-route itself if its primary path is obstructed.

Wireless devices do not have to fit into your pocket, so they can have more effective antennas. Specialized antennas can be added for specific types of applications where required.

While it might be amusing to watch Steve Jobs squirm through this situation, the problems that Apple is experiencing should not make you resist considering wireless instrumentation for appropriate applications. The potential upside is far too great. Read our story, The Transparency of Wireless for more detailed information.

--Peter Welander, pwelander@cfemedia.com
Control Engineering



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me