Anti-piracy campaign: China reports crackdown on illegal software is paying off

China has seen a 53-percent increase in the number of organizations using copyrighted software since new laws came into action in April 2006, according to the country's National Copyright Administration.


BEIJING—China has seen
The figure was released by the National Copyright Administration (NCA) over the Spring Festival period, and highlighted an increase from 1,500 in December 2007 to 2,300 by the Spring Festival, February 7 this year. However no one was available from the NCA to comment on why the figure had risen so sharply over such a short period.
In April 2006, the NCA—along with eight other ministries—jointly issued a circular promoting legal use of software among large companies.
As part of a crackdown on pirated software, the government ordered municipal and local authorities to buy computers with pre-installed legitimate software and required all domestic and imported computers to be sold with legitimate software pre-installed to prevent software piracy at the source.
Central and provincial governments have investigated 3,600 enterprises. More than 1,100 companies have faced penalties for using pirated software, Liu Binjie, director of the General Administration of Press told a conference in December 2007.
Sales of legitimate software in China have benefited as a result. Microsoft , for instance, projected in April last year a 20-percent rise for the year's sales in China due to a combination of government anti-piracy efforts and new products.
China's software industry registered a 23.1-percent rise in sales from 390 billion yuan (52.77 billion U.S. dollars) in 2005 to 480 billion yuan in 2006.
China has consistently worked against piracy, destroying pirated books and DVDs, cracking down on peddlers selling counterfeit products, and raiding factories churning out fakes.
Statistics from the Supreme People's Court indicate that Chinese courts handled 769 intellectual property rights (IPR) cases in 2006 and prosecuted 1,212 offenders—up 52.2 percent and 62.21 percent
The top court has ordered stricter penalties for IPR violators, saying "all illegal gains and manufacturing tools of IPR violators should be confiscated and their pirated products destroyed."
The top court even stepped up the fight against intellectual piracy by lowering the threshold to prosecute people manufacturing or selling counterfeit intellectual property products.
The interpretation issued by the top court last April states that any company that
The new rules also widen the definition of a "serious IPR offender." Anyone who produces more than 2,500 counterfeit copies can now be thrown in jail for up to seven years.
Fines for convicted counterfeiters also were raised

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me