AME: Death by 1,000 Kaizens

Are your employees ready for the Lean journey or suffering from too many Kaizen events? Before you can ever be successful in integrating Lean practices, it’s important to first understand why employees come to work each day.


Are your employees ready for the Lean journey or suffering from too many Kaizen events? Before you can ever be successful in integrating Lean practices, it’s important to first understand why employees come to work each day. Photo taken by Joy Chang, CFEAre your employees motivated by the thought of your next Lean event, or do they feel as though they are suffering death by a thousand Kaizens? A company I recently visited was clearly in the latter category, but managers and leadership within the company weren’t aware of it. It was only after speaking with several employees that it became clear that the nearly one dozen Kaizen blitz events introduced during the past year actually had served to diminish employee motivation and interest in Lean rather than improve it.

Have you been involved in one too many Kaizen events? A Kaizen event can be a risky venture. On the one hand, they yield significant improvements in workflow efficiency in a short period of time and leave employees feeling energized and excited from the experience. On the other hand, these results can become addictive for executives, leading to the belief that ongoing blitzes and events are the fastest way to drive continuous change and improvement. To employees, the entire experience can begin to feel overwhelming and ineffective.

If you’re beginning to consider whether or not you’ve gone Kaizen crazy, consider these three questions as they pertain to how you’ve positioned Kaizen as a tool for improvement.

1. Are your goals clear?

When Columbus set sail for East Asia, his objective was simple: to find a new route to Asia in order to increase trade opportunities. Proving to scientists that the world was not flat was only a benefit of achieving this objective. Are you clear on your goals for engaging in Lean? If increasing productivity or reducing costs are not your objectives, then you’re not clear on your objective, because these are outcomes. Being clear on objectives allows for the selection of the right tools and the right approach at the right time.

2. What’s the benefit to your employees?

A young employee recently confided in me that he felt too many employees at his company were there to support Bob, the owner. He said, “This is wrong. We should work here to benefit ourselves, not the business owner.” His comment is a perception that he holds, and that, in turn, influences the decisions he makes while at work. The amount of effort he exerts will be determined based on the extent to which he believes that Bob is helping to benefit his personal objectives. Every employee has different reasons for staying in his or her job despite various frustrations that may occur on a daily basis. Before you can ever be successful in integrating Lean practices, it’s important to first understand why employees come to work each day. Underlying this answer is the key to aligning employee benefits with the benefits achieved through Lean, and offers the starting point to build engagement and participation.

3. Are you prepared to hand over the reigns?

Lean is not a management initiative; it’s an employee opportunity. Lean offers the insights and tools to improve how work is done, which should reduce employee frustration and make for more simplified and less frustrating work. For this reason it’s critical that employees are handed the reigns to make decisions that influence their work. Specifically employees must be given the opportunities, resources and support to effect the changes they feel are necessary. Leadership must then be willing to hand over the reigns to empower employees to make decisions, take action and effect change. Are your frontline and middle managers ready to hand over the reigns?

Shawn Casemore is the president and founder of Casemore and Company, Incorporated. Courtesy: AMEDeath by a thousand cuts might seem bad, but try participating in an unplanned series of Kaizen events where objectives are unclear, value is weak and there is little opportunity for employees to take action on their ideas. That is the setting for a slow and painful death. Rather than employees suffering death by a thousand Kaizens, clearly address the three questions above and watch engagement and improvement build as a result.

Shawn Casemore is the president and founder of Casemore and Company, Incorporated. This article originally appeared on AME Target Online Magazine. AME is a CFE Media content partner. Edited by Joy Chang, digital project manager, CFE Media,

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me