AIA's 2011 COTE top ten green projects selected

American Institute of Architects have selected the top ten examples of sustainable architecture and green design solutions that project and enhance the environment.

04/14/2011


The American Institute of Architects (AIA) and its Committee on the Environment (COTE) have selected the top ten examples of sustainable architecture and green design solutions that protect and enhance the environment. The projects will be honored at the AIA 2011 National Convention and Design Exposition in New Orleans.

The COTE Top Ten Green Projects program, now in its 15th year, is among the profession's best known recognition program for sustainable design excellence. The program celebrates projects that are the result of a thoroughly integrated approach to architecture, natural systems and technology. They make a positive contribution to their communities, improve comfort for building occupants and reduce environmental impacts through strategies such as reuse of existing structures, connection to transit systems, low-impact and regenerative site development, energy and water conservation, use of sustainable or renewable construction materials, and design that improves indoor air quality.

The 2011 COTE Top Ten Green Projects jury includes: Joshua W. Aidlin, AIA, Aidlin Darling Design; Mary Guzowski, University of Minnesota School of Architecture; Kevin Kampschroer, General Services Administration, Office of Federal High-Performance Green Buildings; Mary Ann Lazarus, AIA LEED AP, HOK; Jennifer Sanguinetti, P.E. LEED AP, Smart Buildings & Energy Management, BC Housing; and Lauren Yarmuth, LEED AP, YRG New York.

The descriptions below give a brief summary of the projects. You can learn more about these projects by clicking on the name of the project/firm name.

Cherokee Studios, Los Angeles
BROOKS + SCARPA (formerly Pugh + Scarpa)

This urban infill, mixed-use, market-rate housing project was designed to incorporate green design as a way of marketing a green lifestyle. The design maximizes the opportunities of the mild, Southern California climate with a passive cooling strategy. Together with high-efficiency LED and electric lighting, photo and occupancy sensors, and natural daylighting - energy use was minimized. 100% of the total regularly occupied building area is day lit and can be ventilated with operable windows. A combination of cool roof covered in solar panels, green roof, and blown-in cellulose insulation complete an efficient building shell exceeding California Title 24 by 47%.

First Unitarian Society Meeting House, Madison, WI
The Kubala Washatko Architects, Inc.

The 20,000-sq-ft addition to the Frank Lloyd Wright-designed national historic landmark Meeting House is approximately 40% more efficient than a comparable base case facility. The new building design features recycled-content and locally-sourced materials. CO2 sensors trigger a ventilation system that provide energy savings when spaces are unoccupied. 91% of regularly occupied areas are daylit though Individual lighting controls are contained in all building areas. The addition nearly doubles the building footprint but a vegetated roof and a reduction in parking spaces actually increases the percentage of pervious vegetated surface on the property.

Kiowa County K-12 Schools, Greensburg, KS
BNIM Architects

Following the devastating tornado that destroyed their town and schools, USD 422 chose a bold strategy to combine their schools into a single K-12 facility that would align with the town's sustainable comprehensive master plan. The facilities design optimizes daylighting and natural ventilation in all classrooms, which increases student academic performance/potential and focus. The site and building design reduce the urban heat island effect on Greensburg through open area allocation and diverse landscaping. A 50-kW wind turbine provides a portion of the electricity needs while the remaining power is generated at the wind farm located outside of town.

High Tech High Chula Vista, Chula Vista, CA
Studio E Architects

This public charter school serving 550 students in grades 9-12 with an approach rooted in project-based learning uses a building management system which integrates a weather station, and monitors and controls the lighting and mechanical systems of the facilities, in addition to the irrigation and domestic water systems. This optimizes thermal comfort, indoor air quality, lighting levels, and conserves energy and water. The facilities reflect the school’s guiding principles of personalization, adult-world connection, and common intellectual mission. These principles permeate every aspect of life at HTH: the small school and class sizes, the openness and transparency, sustainable design attributes, and showcasing of student work in-progress.

LIVESTRONG Foundation, Austin, TX
Lake|Flato Architects

The adaptive reuse of a 1950’s built warehouse transformed the concrete tilt-wall building to provide a multi-functional office space for the staff of 62. 88% of the materials from the demolition of the dilapidated warehouse were recycled and used in the new design. In order to allow for the most engaging open office environment, the team replaced the roof’s center bays with north facing clerestory windows that harvest ample diffused daylight for the core workspace. No toxic chemicals are used in or around the building in accordance with green housekeeping and landscape procedures adopted by the Foundation. Achieving LEED Gold certification, the project reflects the LiveStrong mission "to inspire and empower people affected by cancer."

LOTT Clean Water Alliance, Olympia, WA
The Miller | Hull Partnership

While most sewage treatment plants are invisible to their communities and separated by a chain link fence, the LOTT Clean Water Alliance Regional Service Center is a visible and active participant in the public life of Olympia. Different strategies were utilized to control solar heat gain, improve the energy performance of the building, and introduce daylight and provide views. Methane generated from the plant’s waste treatment process is used in a cogeneration plant to generate electricity and heat. The heat is used directly in the building through a low temperature water loop connected to water source heat pumps, thus eliminating the need for a boiler, cooling tower, or geothermal field.

OS House, Racine, WI
Johnsen Schmaling Architects

Occupying a narrow infill lot in an old city neighborhood at the edge of Lake Michigan, this LEED Platinum home demonstrates how a small residence built with a moderate budget can become a confident, new urban constituent. The local climate, with its very cold winters and hot, humid summers, required a careful mix of active and passive design strategies to ensure proper interior conditioning. Taking advantage of the lake breeze and the site’s solar exposure, outdoor rooms were created to reduce the house’s depth, allowing for maximum natural cross-ventilation and daylight to wash the inside. The house features a compact structured plumbing system with low-flow fixtures throughout and an on-demand hot water circulating pump, significantly reducing water consumption.

Research Support Facility (RSF) at the National Renewable Energy Laboratory (NREL), Golden, CO
RNL Design

With the goal of creating the largest commercial net-zero energy structure in the country, the building is meant to serve as a blueprint for a net-zero energy future and influence others in the building industry to pursue low energy and net-zero energy performance. NREL and Department of Energy’s goal is to transform innovative research in renewable energy and energy efficiency into market-viable technologies and practices. Many of the integrated passive design strategies such as daylighting and natural ventilation strongly support both energy and human performance. An open office plan resulted in a higher density workplace reducing the building footprint per person.

Step Up on 5th, Santa Monica, CA
BROOKS + SCARPA (formerly Pugh + Scarpa)

This mixed-use project provides 46 studio apartments of permanent affordable housing and supportive services for the homeless and mentally disabled population in the heart of downtown Santa Monica. The density of the project is 258 dwelling units/acre, which exceeds the average density of the Manhattan borough of New York City by more than 10%. The building is located in a transit-oriented location with access to community resources and services, providing a healthy living environment for residents and using resources efficiently. Based on California Title 24-2005 published by USGBC on this building is nearly 50% more efficient than a conventionally designed structure of this type.

Vancouver Convention Centre West, Vancouver, British Columbia
Design Architect: LMN Architects, Prime Architects: DA/MCM

As the world's first LEED Platinum convention center, this project is designed to bring together the complex ecology, vibrant local culture and urban environment, embellishing their inter-relationships through architectural form and materiality. The living roof, at 6 acres it is the largest in Canada, hosting some 400,000 indigenous plants. Free cooling economizers can provide cooling for most of the busy seasons for the convention center. The heating and cooling is provided by very high efficiency, sea water heat pumps powered by renewable hydro electricity. The interior is fitted throughout with CO2, VOC, and humidity sensors, which can be monitored in conjunction with airflow, temperature, and lighting controls to optimize air quality on a room-by-room basis.

- Edited by Amanda McLeman, Consulting-Specifying Engineer, www.csemag.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Leaders Under 40 program features outstanding young people who are making a difference in manufacturing. View the 2013 Leaders here.
The new control room: It's got all the bells and whistles - and alarms, too; Remote maintenance; Specifying VFDs
2014 forecast issue: To serve and to manufacture - Veterans will bring skill and discipline to the plant floor if we can find a way to get them there.
2013 Top Plant: Lincoln Electric Company, Cleveland, Ohio
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Bring focus to PLC programming: 5 things to avoid in putting your system together; Managing the DCS upgrade; PLM upgrade: a step-by-step approach
Balancing the bagging triangle; PID tuning improves process efficiency; Standardizing control room HMIs
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.