After a Strong December, LCD Panel Market to Moderate in Q1

Large-sized liquid-crystal display (LCD) panel sales saw a normal lull for Q1, but are still expected to be higher than first and second quarters sales of 2013.

02/05/2014


The market for large-sized liquid-crystal display (LCD) panels is set for a moderate seasonal decline in the first quarter after a busy end-of-year in 2013 that saw record shipments for TV and tablet panels, according to a new report from IHS Technology.

Global LCD panel shipments for the first quarter of 2014 will reach an estimated 222.0 million units, down 9 percent from 244.4 million at the end of the fourth quarter last year. Despite the drop, considered normal at this time of the year, the latest shipment projections for the first three months point to a robust market, with forecast volume larger than those of either the first or second quarter of 2013 and nearly equaling the third’s, as shown in the attached figure.

“After completion of the pre-stocking and rush orders in the fourth quarter, market demand for LCD panels will not be as strong in January, which will affect overall volume for the first quarter,” said Ricky Park, senior manager for large-area displays at IHS. The findings are contained in the report, “Tablet Shipments Again Set Record High,” from the Display Materials & Systems service of IHS.

There will also be fewer working days for panel manufacturers in China at the end of January during the Lunar New Year, when it is customary to take a break from work for a week or longer. As a result, panel shipments will be impacted until February for large-sized LCD panels, which pertains to the display market for TVs, monitors, notebooks and tablets.

A mighty December overall

December proved an exceptional month for the TV as well as tablet panel segments, and sufficiently strong for the notebook panel market. Only the monitor panel sector, which continues to lose ground, did not show growth for the month.

For TV panels, shipments in December reached 20.2 million units, the first time since May that volume exceeded the 20.0 million mark, thanks to solid year-end promotions by TV brands. The 50-inch-and-above size grew its share of the TV panel market in the fourth quarter to 14 percent, up from 10 percent in the third quarter—more evidence of demand for larger-sized panels among consumers.

Panel makers also created a volley of new sizes to pitch to the market. Using economical glass-cutting processes and efficient utilization, panel makers like Innolux from Taiwan introduced the 39.5-inch TV panel, while Chinese makers BOE and CSOT each supplied a new 48-inch panel. South Korea’s LG Display also joined in the fray, launching the 49-inch, prompting a similar response from CSOT.

The tablet panel market was likewise a big performer in December as shipments surged to 31.1 million panels for the month, up 43 percent from the same time a year ago. Japan’s Sharp enjoyed the largest growth after shipments grew a phenomenal thirteenfold from November, thanks to orders from Apple for its 7.9-inch iPad mini tablet.

The unbranded white-box tablet market in China also proved sturdy during the period, propelling large increases in tablet panel shipments for Taiwanese panel makers CPT, HannStar Display and Innolux.

In the notebook panel market, Hewlett-Packard was a big customer. Because of HP, notebook panel orders climbed for the market’s four main notebook panel suppliers: Innolux, AUO from Taiwan, LG Display and fellow South Korean maker Samsung Display. Total notebook panel shipments in December reached 16.7 million units, up 4 percent for the month.

Among the four major panel markets, only the monitor segment continued to underperform in December. LCD panel shipments for monitors amounted to 13.7 million units, down nearly 2 percent from the month before—and off by an even larger 8 percent from a year ago in December 2012.

The weak shipments from monitors notwithstanding, overall December shipments for large-sized LCD panels rose to 82.4 million units, up slightly from 81.6 million in November, but growing by a heady 7 percent from year-ago levels.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me