Advancing Technology: Energy-efficient microchips

Energy savings at the micro-scale can be substantial when spread over a vast number of chips, albeit less evident than in larger-scale products. Controllers using such chips can be embedded in myriad applications, leading to the question, “What’s better than a good microprocessor?” The answer of late seems to be an energy efficient one.

05/01/2009


Energy savings at the micro-scale can be substantial when spread over a vast number of chips, albeit less evident than in larger-scale products. Controllers using such chips can be embedded in myriad applications, leading to the question, “What’s better than a good microprocessor?” The answer of late seems to be an energy efficient one.

Transistor efficiency improvements come from hardware (silicon) design, new chip materials, and software enhancements. Savings are realized in one of two ways: 1) less energy consumed from lower current flows enabled by efficient processor circuits or 2) ability to add more functions with little or no increase in power usage and heat generation. For example, Intel Corp. uses cost/benefit analysis to justify adding functions to its newest, energy-efficient chips.

One recent design trend to raise chip productivity and efficiency is to place multiple, independent execution cores on a single silicon die—but without increasing overall processor package size. These multi-core processors (MCPs) permit more flexible, hence inherently more efficient, power distribution over the chip’s sections.

Advanced Micro Devices (AMD), IBM, Intel, and Sun Microsystems are among suppliers of MCPs. Newest offerings include Intel’s Xeon processor 5500 series and AMD’s several models of Opteron HE energy-efficient chips. Manufactured using advanced 45-nanometer (nm) process technology, these MCPs feature four cores which deliver improved energy-efficiency. Newer chip architectures also streamline data communication paths that reside all within the processor. AMD claims that server platforms based on Opteron HE processors offer up to 20% lower idle power compared to similarly configured competing systems.

Still, ever-shrinking chip dimensions pose power-wasting current leakage. A major leakage source is the chip’s on/off mechanism—or gate circuit—whose insulation layer has been progressively thinned to raise gate capacitance, required for higher chip performance. One solution is to replace traditional silicon dioxide as the gate insulator with so-called high-k (high dielectric constant) materials, which can be relatively thicker to stop current leakage and still deliver the capacitance needed.

Software design can also reduce chip power consumption through more efficient algorithms. Intel’s Xeon processor 5500 series includes simultaneous multithreading, a method that allows two threads to execute per processor core for more energy-efficient performance.

Frank J. Bartos, P.E., is a Control Engineering consulting editor.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me