Advanced hydraulic controls save 40 percent in fuel: Excavator at IFPE 2011

The Engineering Research Center for Compact and Efficient Fluid Power (CCEFP) will highlight the center’s booth with a high efficiency excavator developed at Purdue University. Advanced controls result in 40% fuel savings.

03/09/2011


Advanced hydraulic controls are capable of saving 40% in fuel in some applications, important as petroleum-based fuels increase in price. A Bobcat 435 Compact Excavatorhigh efficiency excavator, one of four test beds being developed through the research program of the National Science Foundation-funded Engineering Research Center for Compact and Efficient Fluid Power (CCEFP), will be among the highlights at the Center’s booth at IFPE 2011 (Booth #13004). The excavator, being developed at Purdue University under the direction of Professor Monika Ivantysynova, serves as a platform for demonstrating research advances throughout the CCEFP.

The stock load sensing hydraulic system on a five-ton Bobcat 435 excavator was replaced with a displacement controlled hydraulic system. The new hydraulic system reportedly shows a 40% fuel savings, on average, in side by side testing with a standard machine of the same model. With the new system architecture, all functions are controlled electronically thereby allowing the use of advanced control strategies. An advanced machine power management control strategy has been implemented on top of the displacement control platform to minimize the fuel consumption of the machine according to the working cycle performed. The improved efficiency offered by displacement controlled technology has led to lower working temperatures for the hydraulic fluid which should lead to longer fluid life and less maintenance.

“The work on this test bed at Purdue, supported by additional research throughout the seven universities in the Center’s network, has significant implications for future advancements in fluid power technology and for energy savings,” according to Dr. Kim Stelson, CCEFP Director. “IFPE and CONEXPO-CON/AGG exhibitors and attendees alike will want to see the excavator first-hand.” Additional information about the this project will be available at the CCEFP booth and in presentations included in the 52nd National Conference on Fluid Power (NCFP) during sessions scheduled for March 24, 2011.

Fluid power research in other areas sponsored by CCEFP will also be featured at the CCEFP booth and as a part of the Technical Conference, where more than forty of the Center’s faculty and students will take their place among a total of 120+ presenters. The Center will also hold its 5th Annual Meeting in conjunction with IFPE. Industry supporters of CCEFP are encouraged to participate in the meeting which is scheduled for March 22 in an area immediately adjacent to the IFPE show floor. Posters describing CCEFP research will be presented by Center students following the Annual Meeting.

IFPE

www.ccefp.org

Engineering Research Center for Compact and Efficient Fluid Power (CCEFP)

- Edited by Gust Gianos, Control Engineering, www.controleng.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me