A new twist on level detection

I read with great interest your article on level indicators ("Selecting Liquid Level Detectors For Tanks," PE, February 1998, p 39, File 3599).

05/01/1998


I read with great interest your article on level indicators ("Selecting Liquid Level Detectors For Tanks," PE, February 1998, p 39, File 3599).

My company has used or experimented with most, if not all, of the various types of level sensors mentioned in the article. Some are obviously better suited to certain applications than others; almost all are bothered by dirty or foamy liquids, requiring frequent cleaning.

For many years, we have used a type of level detection not covered in your article. We call them bubbler tubes . They probably fall closest to the category of pressure-type sensors. In this process, a very small stream of instrument air is forced down a dip-tube to within about 1 in. of the tank bottom. The flow rate is set by a small rotometer. The residual pressure in the bubbler tube is directly proportional to the fluid level. A pressure transducer converts the signal to a 4-20 mA output which can be calibrated to read the liquid depth, or to control valves, etc.

We have used this system for many years to monitor and control the levels in brine tanks that serve our desiccant refrigerant systems. The biggest advantage is that they work well in dirty solutions or in applications where foaming is present, and they are relatively simple and inexpensive. One disadvantage is that they are subject to deviation caused by changes in the solution specific gravity.

We are currently experimenting with ultrasonic devices, primarily for the purpose of eliminating the P/I transducer required to convert an electronic signal compatible with our PLC control systems. The ultrasonic sensor generates a 4-20 mA signal directly, thus eliminating one control device. Because foaming of the desiccant solution is an occasional problem, we mount the ultrasonic devices in stilling wells, but we have some concerns for the possibility of getting false signals from deposits that may form on the inside of the wells.

If ultrasonic devices do not prove reliable in some of our applications, we will go back to the old reliable bubbler tubes. -- Robert E. Sudduth, PE, Anheuser-Busch Companies, Inc., St. Louis, MO





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me