A giant pressure cooker

The tension has been bubbling in the mechanical, electrical, plumbing, and fire protection engineering fields for some time now, and it’s causing changes in how these firms do business.

08/19/2011


Based on several conversations I’ve had with readers, a pressure cooker is about to go off in the engineering community. The tension has been bubbling in the mechanical, electrical, plumbing, and fire protection engineering fields for some time now, and it’s causing changes in how these firms do business.

For one, firms are busier. They’re fielding more requests for proposals, and the proposals that were on hold are starting to take off as money is released. The biggest problem: Firms still aren’t hiring. Engineers are being pushed to the limit, and are working 60-, 70-, and 80-hour weeks. Firms that are hiring are being very selective—they are cherry-picking the best talent.

Some firms are hiring entry-level engineers (or engineers in training) because they have smaller starting salaries. Though the long-term payback is high on engineers that you can mold to fit your company’s needs, these young engineers need mentoring and guidance in their first few years on the job, which can cost the more seasoned engineers time and energy. Mentoring is just one small piece of the puzzle; quite a few other pieces will be discussed at the Career Smart Engineers Conference Oct. 12 to 13 in Chicago. I encourage you to join us to help push your firm to the next level of business and communications.

Despite this human resources pressure, many engineering firms are excelling. We’ve ranked the top firms based on MEP design revenue in the annual 2011 MEP Giants report. In a series of articles, we explain how they are reacting to the market and other challenges. The No. 1 challenge: The economy’s impact on the construction market. No 2: Evolving information technologies for design or project management. As you might expect, there have been a lot of mergers and acquisitions this year, which Mick Morrissey discusses on page 36. (Spoiler alert: One-fifth of the MEP Giants were either acquired or merged in the past year. Talk about pressure!)

Another interesting trend gleaned from the 2011 MEP Giants data: new construction and retrofits are neck-and-neck in revenue (each came in at 41%). In 2010 it was also close: 32% new construction revenue and 30% retrofit revenue. In 2009, new construction was ahead at 45%; retrofits were at 38%. In 2008, new construction was ahead at 45%, and retrofits lagged at 32%. This shows that since the recession started in 2008, pressure to do more retrofits is increasing, and the percentage of new construction projects has remained relatively flat.

Please send me a note at arozgus@cfemedia.com. I’d like to hear about your work pressures, and how they’re pushing you to work differently.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me