7 tips for an industrial Ethernet cyber security strategy

Industrial operations are becoming more aware of their vulnerability to cyber mischief or cyber attacks. Here are seven tips that can create the foundation for a cyber security strategy.



Industrial operations are becoming more aware of their vulnerability to cyber mischief or cyber attacks. Internet protocol (IP) strategy allows organizations access to more and better data and cost-effective remote monitoring and control of facilities, but it requires thought to avoid malicious or accidental security incidents. Here are seven tips that can create the foundation for a cyber security strategy. 

1) Physical:  Cyber security starts with physical security.  If outsiders cannot gain access to the premises, it is harder for them to access sensitive data. 

2) Firewalls:  Protect cyber assets with firewalls at the cyber perimeters of your critical cyber assets just as you protect the physical perimeter.

3) Port access control:  In addition to denying access to the building, disallowing unauthorized devices to be plugged into ports on switches and routers makes for a more secure environment.

4) Password health and authentication:  Change passwords regularly – and make sure that they are long enough and complex enough that they are difficult to crack.  Then consider adding authentication.  More secure than simple authorization (which ensures the person accessing the system is using the right code), authentication ensures that the person or device requesting access is who he/it says he/it is.

5) Encryption:  Fiber cabling is much more secure than copper when used to relay data between secure locations.  Sending encrypted data adds an extra level of protection outside secure facilities.

6) VPNs and VLANs:  Virtual Private Networks and Virtual LANS both provide extra layers of security for transmissions over multi-purpose transport networks.

7) Employee training:  Security is only as good as the practices that are in place.  Employees, without meaning to create a security breach, can be lax with passwords, security codes and other primary measures unless they are educated – and reminded – about the importance of security.

- Peter Wood is vice president of operations for GarrettCom Inc. www.garrettcom.com.

Also read, from Control Engineering:

10 Control System Security Threats;

Securing Legacy Control Systems; and

Cyber security for control systems: More tips, warnings from INL

- Edited by Mark T. Hoske, Control Engineering, www.controleng.com.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.