5-port power-over-Ethernet switch

The 5-port unmanaged Ethernet switch is combined with Power-over-Ethernet technology to connect and power Ethernet devices over a single cable. PoE, which is relatively new to industrial and plant-floor applications, is a technology to transmit power plus data to remote Ethernet devices over standard twisted-pair Cat5e cables. More formally known as IEEE 802.3af internationally, this standard specifies a supply of 48 Vdc at up to 15.4 W per port.

04/21/2008



The EKI-2525P combines a 5-port unmanaged Ethernet switch with Power-over-Ethernet (PoE) technology to connect and power Ethernet devices over a single cable. PoE, which is relatively new to industrial and plant-floor applications, is a technology to transmit power plus data to remote Ethernet devices over standard twisted-pair Cat5e cables. More formally known as IEEE 802.3af internationally, this standard specifies a supply of 48 Vdc at up to 15.4 W per port.

The switch has four PoE ports that are capable of supplying up to 15.4 W each. Additionally, each port can automatically detect when PoE compliant devices are attached, before supplying power, allowing the use of traditional (non-PoE) Ethernet devices if needed.

Each Ethernet port is equipped with front-facing LED indicators that provide link, transmission speed, activity and PoE output status to aid in diagnosing issues with cables and attached devices. With auto-MDI/MDI-X, there is no need to use crossover cables for inter-switch connections. Auto-negotiation provides optimum link configurations and compatibility with legacy devices.

Advantech Corp., Industrial Automation Group

www.advantech.com





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2015 Top Plant: Phoenix Contact, Middletown, Pa.; 2015 Best Practices: Automation, Electrical Safety, Electrical Systems, Pneumatics, Material Handling, Mechanical Systems
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Migrating industrial networks; Tracking HMI advances; Making the right automation changes
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.