2008 ARC Awards judge's score sheet

05/16/2008


Give each section of the entry points depending on how well the tactics were implemented, based on the information provided. If you think the question was not answered at all (in other words, avoided)—or if the building failed to include certain criteria of the ARC Awards, please give the section a ranking of “1 point.” Building systems (20 pts)
Rate the solutions to the challenges posed

Rate the building’s MEP design for innovation

Technology (16 pts)
Rate the use of new or unusual technologies

  • Building controls and automation

 

  • Electrical distribution

 

  • Fire protection

 

  • HVAC

 

  • Lighting controls

 

  • Motors and Drives

 

  • Plumbing

 

  • Software

Sustainability design and documentation (40 pts)

Rate the building’s energy efficiency

Rate the building’s IAQ system

Rate the building’s water conservation

Rate the building’s renewable energy(__/5 design)

Integration (10 pts)
What examples of interdisciplinary integration, for example, online collaboration, BIM, etc.,

Rate the level of control system integration for this project—BAS, fire, communication, lighting, etc. Photography (18 pts)
Do the photos show the building’s exterior and interior?

Do the photos show:

  • Building controls and automation

 

  • Electrical distribution

 

  • Fire protection

 

  • HVAC

 

  • Lighting controls

 

  • Motors and Drives

 

  • Plumbing

Do the photos show specifically referenced engineered systems? Bonus (10 pts)
What is the repeatability factor of the solutions from this project? Total Building Systems points Total Technology points Total Sustainability points Total Integration points Total Photography points Total Bonus points Overall points





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2015 Top Plant: Phoenix Contact, Middletown, Pa.; 2015 Best Practices: Automation, Electrical Safety, Electrical Systems, Pneumatics, Material Handling, Mechanical Systems
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Migrating industrial networks; Tracking HMI advances; Making the right automation changes
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.