1999 Product Of The Year Awards

As the century comes to a close, Plant Engineering is proud to end on a high note -- with the presentation of the candidates for "1999 Product of the Year.

11/01/1999


As the century comes to a close, Plant Engineering is proud to end on a high note -- with the presentation of the candidates for "1999 Product of the Year."

To be a candidate for this competition, a product must have been made available for purchase between October 1, 1998, and September 30, 1999; be new to the world market; and be useful in the plant engineering function.

In the past 11 yr, the more than 1000 winning products in this contest have ranged from "high-tech" to "low-tech," but all have one thing in common: They are all practical, functional, and just plain handy to have around. In fact, the goal of all our winners has been to make your job easier!

And now, we need you!

Our panel of experts (pictured on the following page) has narrowed down the field, but now we need you to help us select the winners. The product receiving the highest number of votes wins the Grand Award. Additionally, each category honors Gold, Silver, and Bronze winners. After looking through our finalists on the following pages, please fill out the ballot to help us select the best new products of 1999.

This year's competition offers 15 categories of plant engineering products that can help you perform your job more efficiently. The categories are Electrical Power; Electric Motors, Drives, and Controls; Lighting; Construction, Buildings, and Grounds; Fluid Handling; Compressed Air; Heating, Ventilating, and Air Conditioning; Power Transmission; Maintenance Tools and Equipment; Main- tenance Products; Environment, Safety, and Health; Control Equipment; Instruments; Material Handling; and General and Maintenance Software.

Trophies are presented to the winners at a black-tie reception during the National Plant Engineering Show in Chicago. Winners from this competition will be honored March 13, 2000.

Ballots postmarked by December 15, 1999, will be entered in a special prize drawing for $100 gift checks. Only original ballots will be accepted. Additional balloting rules and prize information are listed on the next page.

The Judges Bill Muni, PE

Design Engineer

UOP

Pete Gilbert, CPE

Plant Engineer

Level Valley Creamery

William J. Meeks, PE

Senior Consultant

Gainsystems

Hank Krishman

Plant Maintenance Mgr.

Kalmus & Assoc.

John Klein, CPE/CFEP

Plant Engineering Mgr.,

Knowles Electronics, Inc.

Ricky Heidgerken, CPE

Vice President, Total Quality & Mgmt. Strategies

Kiehl Engineering Co., Inc.

Larry Pierog

Plant Engineer

Favorite Brands

Mail your ballot by December 15 and you could win $100!

You could win a $100 prize just by voting in the 12th annual Plant Engineering "Product of the Year" competition.

We will award a $100 gift check to each of 10 lucky voters. Winners will be selected by random drawing from ballots we receive postmarked by December 15, 1999. Only original ballots will be considered for the drawing.

Product balloting and prize drawing rules

1. Vote for five products by writing in the appropriate voting number appearing with each item.

2. No more than one ballot may be submitted by an individual. Only original ballots will be accepted.

3. All complete ballots postmarked by December 15, 1999, will be entered in a random drawing for the $100 prizes.

4. Employees of Cahners Business Information and its agencies are not eligible.

5. Contest is void where prohibited or taxed by law. Liabilities for any taxes on prizes are the sole responsibility of the winners.

6. All decisions made by the editors or publisher of Plant Engineering magazine on the administration of this contest are final.





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me