IO-link analog plugs for limited analog signal systems
Balluff’s IO-Link Analog Plugs, with an enclosure rating of IP 67, are connected directly to the sensor and convert analog signals into IO-Link signals – ideal choice for systems with limited instances of analog signals.
The IO-Link Analog Plugs from Balluff are an ideal choice for systems with limited instances of analog signals. With an IP67 enclosure rating, the plugs feature a space-saving housing, are connected directly to the sensor and convert the analog signals into IO-Link signals before transmission. In this way they provide significant savings potential.
In place of shielded cables, simple unshielded, 3-conductor cable is used. The signal neutrality of the IO-Link ports on the IO-Link Master module in combination with the IO-Link plugs ensures maximum signal variance. Mixing of different input, output, current and voltage signals can be mixed on one module.
Versions are available with a current input of 4-20 mA, voltage from 0-10 V or PT 100, a current output of 4-20 mA and a voltage output of 0-10 V.
Balluff Inc.
- Edited by Amanda McLeman, Control Engineering, www.controleng.com
- Related News:
Long range inductive sensor for difficult applications - 06.06.2011 20:23- Vision sensor reads linear and data matrix codes - 24.05.2011 16:14
- I/O Modules: Product research and advice from Control Engineering subscribers - 01.02.2010 07:00
- I/O hubs save machine builder 60%: Balluff IO-Link - 26.01.2010 14:11
- Level sensors for critical, sanitary packaging lines - 01.01.2010 07:00