Winds power load balancing: Ultracapacitors help

Winds of change are blowing for clean technology energy storage methods to help balance renewable energy sources coming online. Ultracapacitors can help balance the grid as more wind power comes online.

07/28/2011


Wind power is increasing as traditional energy markets are influenced by regional instabilities and, with recent events in Japan, nuclear power seems less attractive politically in many areas. The wind turbine market also is taking advantage of rapid technology advances. [See article on direct-drive wind turbines.] Manufacturers once struggled to cost-effectively capture consistent wind-generated power, but a shift in energy storage practices has resolved that problem. Ultracapacitors are replacing battery-driven energy storage systems and introducing new efficiencies in the wind turbine market, helping to balance the electricity grid. 

While the rotor blades of a turbine can be adjusted to respond to current conditions, this changeability creates waste in battery-powered systems, which are sized to meet the highest possible power demands. Batteries also struggle under moments of high peak power and perform poorly in low temperatures. With short life spans, batteries force maintenance crews to frequently swap out components under potentially dangerous conditions. 

Ultracapacitors resolve those problems because they:

Have a long life span. Batteries last 2 to 4 years, but ultracapacitor life span is more than 10 years. 

Can withstand extreme temperatures. They operate optimally at a temperature range between -40 C and 65 C, whereas batteries function best at -20 C to 40 C.  

Have impressive cycling capability. A battery can offer only 10,000 to 50,000 cycles compared to an ultracap’s million-plus.

Are dropping in cost. The cost of ultracaps has decreased by 99% in the last 10 years. During the same period of time, battery price fell by only 30% to 40%.

For the above reasons, new wind turbine installations will favor ultracapacitors to control blade pitch, ensure optimum positioning, and capture wind speed for better performance and safety.

Brendan Andrews is vice president of sales and marketing at Ioxus Inc. Edited by Mark T. Hoske, CFE Media, Control Engineeringhttp://www.controleng.com 

www.ioxus.com

- Posted by Chris Vavra, Control Engineering, www.controleng.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Diagnostic functions for system safety; Specifying industrial enclosures; Effective decision support for a crisis
Transformers; Electrical system design; Selecting and sizing transformers; Grounded and ungrounded system design, Paralleling generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me