WiFi technology for industrial environments

Set up a wireless infrastructure to support a wireless mobile workforce. Here’s advice on industrial environments, challenges include environment, signal integrity, and protocol selection.


In setting up wireless infrastructures in industrial environments, challenges include environment, signal integrity, and protocol selection.

Industrial environmental conditions more demanding than in an office environment, with extreme temperatures, dirt, dust, moisture, shock, and vibrations. Industrial grade chipset have improved (passive) cooling and sturdy design to ensure reliability and longevity under these adverse conditions.

PoE Octopus switches by Belden require less space than switches with an external power supply and are easier to install and maintain. Courtesy: Belden

High- power electrical consumers, such as engines, welding robots or drives with their frequency converters, cause additional challenges. These can cause overvoltage, glitches, spikes, and noise on power supply lines due to magnetic induction, potential shifts, or high-frequency (HF) coupling. Industrial-grade networking gear uses internal dc-dc coupling with filtering and stabilization that compensates these effects.

Also, the radio can be heavily affected by stray HF noise, various other radios in the environment, and generally highly increased electromagnetic pollution compared to office environments. A special danger in outdoor applications has proven to be a constant threat to office-type access points: lightning strikes in the vicinity, with their extreme currents, cause high voltage spikes in outdoor WiFi antennas, which can easily destroy the radio. New-generation radios designed for industrial use employ overvoltage protection and narrow filters that keep other radio frequencies away and therefore increase reach, reliability, and throughput.

Belden HiVision network software

For any new installation only IEEE 802.11n should be chosen as the wireless standard. This standard increases data throughput compared to IEEE 802.11 b or g, although this is often not the prime concern. It also uses spatial information, which means that waves reflected from walls or steel structures are used just as direct waves are for retrieving the data.

Therefore, IEEE 802.11n offers much better stability of the data streams especially in industrial environments where a lot of large structures and metal objects are common.

- Prof. Dr. Peter Fröhlich is director R&D, networking and controls, Hirschmann Automation and Control GmbH, a Belden company. Edited by Mark T. Hoske, content manager, Control Engineering, CFE Media.



ONLINE extra comment from Fröhlich: “At Belden, our Hirschmann, GarrettCom, and Tofino (see diagram below) brands offer a wide range of network switches, routers, firewall and wireless access points and clients for mission critical and industrial applications, all managed by our Industrial HiVision network management tool. Hirschmann began early on to apply WiFi technologies to harsh environments. Over the years we have gathered a lot of experience in various industrial applications. What we have learned about specific challenges in the industrial environment have all gone into a completely new hardware design for our OpenBAT product line.”

Note: Froehlich, traveling at the time of this information request, used a mobile wireless device to compose, edit, and send his advice and comments about industrial infrastructure for mobile wireless devices.



Tofino decrease risk of cyber security intrusion.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.