UK PV module price watch - Supply chain prices respond to feed-in tariff chaos

Although the UK saw record demand for PV modules up until the December 12th Feed-in tariff cut, on average December saw module prices in the UK decline in response to the heavy cuts that took place, albeit temporarily.

01/11/2012


Although the high court ruled that the changes to tariff were unlawful just over a week later and reversed the cuts; confusion over what the decision means for the industry, mixed with slow demand due to the Christmas break, means that prices have not yet had a chance to re-adjust to the news that the previous highly generous incentive levels appear to be on offer again - for the time being.

Average Supplier Prices Decline

Although December’s FiT cut forced some to pay inflated prices to secure modules via distributors before the FiT deadline, average prices for modules purchased direct from manufacturers declined by 6% over November’s level. The decline came as prices were adjusted to reflect the planned new incentive levels, and distributors and wholesalers cleared stock levels in anticipation of demand evaporating after the FiT cut.

Chart highlighting PV module market prices from the manufacturer. Courtesy: IMS Research

Chinese Tier-2 Pricing Declines to £0.66/W

Given the huge oversupply of PV modules that currently plagues the global PV industry; a spike in demand in the UK offered suppliers around the globe a much welcome opportunity to shift some of their bulging inventories and often at very attractive prices for their customers. This was particularly the case for Chinese Tier-2 manufacturers, who offered crystalline PV modules as low as £0.50/W during December, and average prices for these modules (purchased direct from manufacturers) fell to just £0.66/W during the month.

Despite declining by 15% in December, average crystalline module pricing direct from Japanese manufacturers remained significantly above their competition and over 30% higher than the market average. The long standing high-quality reputation of Japanese suppliers as well as the popularity of high efficiency products (e.g. Sanyo’s HIT module) in small roof-top installations which dominate the UK market, has allowed them to command a premium price.

Chart highlighting UK crystalline PV module market prices from the manufacturer. Courtesy: IMS Research

Rush to Purchase Modules Causes Spike in Distributor Pricing

Distributor pricing remained close to 25% higher than direct-manufacturer pricing in December as installers for small projects continued to favour purchasing in small quantities from local distributors and supply struggled to meet demand.

Although average prices from both distributors and manufacturers declined in December, a desperate rush to complete installations prior to the December 12th deadline, combined with a relatively short supply, saw some customers paying extremely high prices. Prices as high as £2.76/W were recorded for small orders from distributors and the range of prices (difference between highest and lowest prices) offered by distributors increased from £1.39 in November to an incredible £2.16 in December. In comparison, the range of prices offered directly by manufacturers remained fairly stable, as their longer lead times (due to modules not generally being located within the UK) meant that they were less able to provide modules in time to install before the FiT cut.

Chart highlighting overall UK crystalline PV module market prices. Courtesy: IMS Research

Prices To Continue Declining in January – Or Perhaps Not?

The pricing survey also asked respondents how they expected January’s prices to compare to December’s. As the majority of responses were received before the FiT cut was reversed, it is not surprising that the overwhelming majority were expecting prices to continue declining in January. Over 90% of survey respondents were expecting prices to decline in January, with almost 80% anticipating that prices would decline by over 5%. A weighted average of all responses suggests that average prices will decline by 5.5%, making average crystalline manufacturer prices around £0.82/W in January.

At the time of writing this article (January 3rd 2012), the industry is not only experiencing the same ‘first few days back after Christmas’ calm as many industries, but demand is currently stalled by confusion over what the high court’s ruling means for the industry - rather than the low tariff rates that people had previously expected would put the brakes on the market. As the month goes on, clarity will hopefully be restored and demand is likely to return, although some nerves from potential investors over future changes will prevent it reaching the levels that it did in November and early December. As end of year incentive reductions in other major European markets have pushed module prices in Europe lower still, prices in the UK are still predicted to decline this month. 

Chart highlighting overall predicted price increase/decrease in PV modules for January 2012. Courtesy: IMS Research

Profile photo of Sam Wilkinson, a senior market research analyst for IMS Research who specializes in the photovoltaics (PV) market. Courtesy: IMS ResearchJanuary and February will certainly be important months for the UK PV industry as it attempts to adjust once again to the ever changing business environment that relying on government subsidy schemes inevitably brings, and with volatile demand will almost certainly come volatile pricing!



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me