Tweeting your way to closing the skills gap on your plant floor

An aging domestic workforce creates a knowledge deficit, as does the fact that - even though emerging markets are graduating people in science and engineering and related disciplines - these people often lack practical experience.

04/08/2010


Social networking sites like Facebook and Twitter may be useful for more than just telling the world what's on your iPod. Benjamin Friedman, a research manager for product life-cycle strategies with Framingham, MA-based IDC Manufacturing Insights, thinks manufacturers can use social networking and other Web 2.0 technologies to close the knowledge gap that already is forming as workers in the Baby-Boom generation begin retiring.
"The knowledge deficit as a result of workforce attrition is consistent across manufacturing sectors such as aerospace, defense, automotive, high-tech and energy/utilities sectors," said Friedman, author of the report, "Web 2.0: The Inflection Point for Knowledge Management."
In that report, Friedman argues that Web 2.0 technologies in some ways will prove superior to earlier knowledge management applications developed by traditional business software vendors.
For example, he said, while traditional knowledge management solutions attempted to capture knowledge by corporate edict and with rigid tools, Web 2.0 technologies foster "organic" knowledge management by giving workers the means to locate, organize and syndicate knowledge themselves.
According to Friedman, a confluence of factors is creating an environment in which manufacturers must consider investing in new methods of capturing and sharing knowledge. For example:

  • An aging domestic workforce creates a knowledge deficit, as does the fact that - even though emerging markets are graduating people in science and engineering and related disciplines - these people often lack practical experience
  • Traditional knowledge management efforts have been largely unsuccessful. The investments that took place in the 1980s did not deliver the desired results and ended up costing more than anticipated. The reasons? "Intentions were good, but the approaches didn't work very well," Friedman said. "For one, the applications were rigid in nature. For another, companies tended to approach them as corporate Fiats (‘You have to contribute, or else!') and they were often viewed as patronizing."
  • Third, as previously mentioned, Web 2.0 technologies, which were once solutions in search of a problem, are proving to be practical alternatives for this job.
    • But Friedman is quick to point out that Web 2.0 technologies will not completely eclipse previous approaches to knowledge management. "Certainly, there are some traditional tools that need to remain, and Web 2.0 is not designed to replace them," he said, adding that the ones that should remain are those that involve very prescribed processes that do not offer opportunities for deviation. "These are processes that need to be documented, and there should be no level of editorial commentary allowed," he said.

      Timely benefits
      The use of Web 2.0 technologies may be particularly relevant and useful in today's economic climate, where every penny counts. "It can be a way to save money," said Friedman. "For example, if a field technician needs to repair a piece of equipment in the field, in the traditional model, he will drive his truck to the worksite filled with various parts he has pulled from inventory that may or may not be necessary for the repair. He may even need to return to retrieve another part once he realizes that his on-hand inventory from the truck is insufficient."
      However, if the problem is entered in a Web 2.0 environment, another field technician may have logged his experiences with a similar problem. "As a result, the first technician will know specifically what he needs," said Friedman. In some cases, he adds, it may even be possible to solve the problem remotely, not even requiring the technician to go into the field.

      Implementation strategies
      According to Friedman's report, organizations should focus on knowledge management initiatives, including Web 2.0, that offer a mix of structure and prescriptive elements combined with informal solutions that offer information flow at the speed of thought interactively, such as instant messaging. This approach to knowledge management delivers agility in decision-making, as well opportunities for reusing knowledge over the long term.
      The challenge remains in creating a governance model that achieves two things. "On the one hand, it should not fall into a pattern of corporate mandate," he said. "On the other hand, it still needs to provide some level of structure that discourages nefarious intent, and also creates rules on how these systems are to be used."
      Once the balance has been achieved, actual rollout to the workforce should be easier than with traditional knowledge management solutions. "People weren't very familiar with traditional interfaces," said Friedman. "However, people today are very familiar with typical Web applications, so there should be a need for only limited training."
      For guidance, Friedman recommends researching what the U.S. Dept. of Defense is doing in this area. "They are working on this challenge of balance," he said. "They are also putting rules into place that may be able to be used in the workspace."

       

       





No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me