Trends in Renewable Energy Consumption and Electricity

Total Energy consumption declined for a second year in a row to its lowest level since 1996, dropping 10.1% in industrial areas.

04/12/2011


Despite an economic recession and a significant fall in overall energy demand/consumption, the use of renewable fuels grew strongly in 2009. This growth has been supported by federal and state programs, including federal tax credits, state renewable portfolio standards, and a federal renewable fuels standard. The U.S. Energy Information Administration details renewable energy consumption in 2009 and explains the decrease in total energy consumption over the past two years.

Total U.S. Energy Consumption

U.S. energy consumption declined for the second year in a row in 2009, falling 4.8% between 2008 and 2009 to 94.6 quadrillion British Thermal Units (Btus). This follows a 2.1% decline between 2007 and 2008. As a result, total energy consumption in 2009 dropped to its lowest level since 1996.

This is just the third time since 1949 that energy consumption has declined for two or more consecutive years. It declined between 1973 and 1974 and again in 1975. However, consumption rebounded in 1976 above the 1973 level. The longest and steepest decline occurred between 1979 and 1983, when total energy consumption dropped 9.7% and it did not reach the 1979 level again until 1988.

In both of these earlier periods, oil prices that rose steeply and remained at high levels were a major factor in slowing down the economy and hence reducing energy consumption. This time, there has been no steep oil price increase that resulted in permanently higher oil prices; the average annual price per barrel of crude oil was $60 in 2006, $67 in 2007, $94 in 2008, and $56 in 2009. Instead, the economy slowed down mainly due to factors outside the energy sector.

Consumption of all major fuels declined between 2008 and 2009, except for renewables. Coal dropped the most, falling 12%, while petroleum consumption fell nearly 5%, and natural gas consumption fell 2%. Even nuclear fuel consumption fell by nearly 1%. The decline in all of these sources of energy masks the switching of coal to natural gas for electricity generation due to low natural gas prices.

By sector, energy consumption dropped most in the industrial area (10.1%), followed by electric power (4.5%) and then transportation (3.5%). The residential and commercial sectors each experienced declines of under 2%.

Read more…

- Edited by Gust Gianos, Consulting-Specifying Engineer, www.csemag.com



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me