Top 5 Control Engineering articles, May 26 to June 1
Articles about things noncontrol people should know about control engineers, improved supercapacitors for batteries and electric vehicles, new methods for harnessing waste heat, fixing PID, and vision-enabled robots were Control Engineering’s five most clicked articles from last week, May 26 to June 1. Were you out last week? Miss something? You can catch up here.
A few basic differences between control engineers and others in the plant can hinder progress toward optimization. Start a conversation to improve communications and controls. See examples and career advice. Send a link to these seven things other people should know about control engineers, so they understand.
Researchers develop novel supercapacitor architecture that provides two times more energy and power compared to supercapacitors commercially available today.
Electrochemical approach has potential to efficiently turn low-grade heat to electricity, according to MIT and Stanford University researchers.
Proportional-integral-derivative controllers may be ubiquitous, but they're not perfect.
Inside Machines: Robot with machine vision replaces four conventional robots in this Fitz-Thors Engineering Inc. design for a tier 1 automotive supplier. The robot operates continuously, eliminating robot idle time with conventional cells. The new robot approach also eliminates proximity sensors, making it possible to handle a wider range of parts.
The list was developed using CFE Media's web analytics for stories viewed on controleng.com, May 26 to June 1, for articles published within the last two months.
- Chris Vavra, content specialist, CFE Media, email@example.com.
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey