Top 5 Consulting-Specifying Engineer articles, Feb. 17-23, 2014

Were you out last week? Miss something? Here are Consulting-Specifying Engineer’s five most clicked articles from last week, Feb. 17-23, 2014, including articles about the MEP Giants Program, corrosion in electrical systems, laboratory ventilation systems, lighting control requirements, and VFD and motor strategies.

02/24/2014


1. Nominations open for MEP Giants Program

The MEP Giants program lists the top 100 mechanical, electrical, plumbing (MEP), and fire protection engineering firms in the United States. The in-depth analysis of these firms appears in the August issue and reveals what's going on in the industry and how it has changed over the past few years. Special emphasis is placed on commissioning firms in a separate report each October.

2. Avoiding corrosion in electrical systems

Properly specifying electrical products for highly corrosive environments will reduce overall long-term cost and risk of failure.

3. Designing laboratory ventilation systems

Proper ventilation in labs is required to promote and maintain safety and protection to life and property.

4. Lighting control requirements: What's current and what to expect

This article examines lighting control requirements in various codes and standards, commissioning these controls, and what engineers may expect in the future.

5. VFD, motor strategies for energy efficiency

A variable frequency drive (VFD) often is specified to save money by reducing energy consumption in pumps, fans, compressors, or any other motor loads that may be found in a typical building. These best practices will provide the engineer with information on how to specify a VFD to meet load conditions while achieving efficiency.

The list was developed using CFE Media's web analytics for stories viewed on www.csemag.com, Feb. 17-23, 2014, for articles published within the last two months.

- Jessica DuBois-Maahs and Jordan Schultz, associate content managers, CFE Media, jdmaahs@cfemedia.com and jschultz@cfemedia.com.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me