The U.S. Environmental Protection Agency Arrives

Here's how the term “PCB” achieved worldwide notoriety almost overnight.

04/18/2012



The U.S. Environmental Protection Agency was created by Congress in 1970. Within just a few years, the EPA began to study reports of ill effects in humans who had come into skin contact with, or had inhaled fumes from Askarel fluids, and studied incidents of genetic disorders where Askarel had entered into the human food chain. Research studies showed that somewhere between 30% and 70% of the chemical composition of most Askarel was “polychlorinated biphenyl” and thus, the term “PCB” achieved worldwide notoriety almost overnight.

Modern liquid-filled secondary substation transformer. Courtesy: Schneider Electric, Inc.After widely publicized research studies and public hearings (and a few criminal prosecutions), the EPA issued a formal ban on production of PCB in 1979, and issued a long list of mostly confusing regulations to American companies about what to do with the millions of tons of Askarel that were already in active service in electrical equipment everywhere inside and outside their plants.

The formal ban of PCB hit American industry like a bombshell, and left thousands of companies struggling in search of acceptable alternatives. Some alternatives that soon emerged were silicone fluids, high molecular weight hydrocarbons (R-Temp, for one), and perchloroethylene, as retro-fill substitute fluids in existing equipment, as well as for use in new transformers.

A large new cottage industry immediately sprouted, with hundreds of companies specializing in the replacement, removal, and legal incineration of Askarel fluids.

Westinghouse had reasonably good success with producing new transformers that were filled with percloroethylene, under the trade name Wecosol. GE took a slightly different approach with an interesting transformer design trade-named VaporTran, using CFC-113 as the dielectric fluid. A clever and effective design, it used the principle of evaporative cooling for keeping the transformer windings cooled and insulated.

After a few years of study of these new replacement fluids, the EPA found major problems with almost all of them.

The EPA eventually found perchloroethylene to be an even more serious toxin than the PCB it replaced. Silicone fluid was found to have about zero biogradeability—you could cart it off to a landfill at end of life, and it would never go away. R-Temp was classified as a “hazmat hydrocarbon” —if it ever spilled or leaked inside your plant, you’d have to notify the EPA, fill out a lot of incident reports, and call in a hazmat cleanup team. GE’s CFC-113 was found to be a somewhat dangerous fluorocarbon that could damage the earth’s upper atmosphere ozone layer.

American industry in general had spent many tens of billions of dollars in trying to find effective solutions for replacing Askarel fluids, and now the industry was essentially being commanded to do it all over again, to remove and replace most of the more modern replacement fluids, all under the watchful eye of the EPA.

Canada also went through a similar national remediation process, a few years behind the U.S., but with less rigorous government regulation that actually caused much less consistent results than in the U.S.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Improving flowmeter calibration; Selecting flowmeters for natural gas; Case study: Streamlining assembly systems using PC-based control; CLPM: Improving process efficiency, throughput
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me