Switching PM gears for fast and furious maintenance

CMMS conventional wisdom tells us to schedule our machine preventive maintenance items on a calendar, but what if it's too early to check and replace a part?

05/01/2013



CMMS conventional wisdom tells us to schedule our machine preventive maintenance (PM) items on a calendar just like we do for our car tune-ups. It's been 90 days, so it must be time to re-calibrate the auger in the extruder, or replace the impeller on a centrifugal pump. But what if it's too early to check and replace a part?

While being reactive and waiting to make repairs only after equipment fails hurts productivity, changing parts before the end of their run is also a waste of time and money. If you're doing too many PMs based on a calendar and you're wasting precious maintenance resources to do the work, you may want to consider more efficient options. To preserve equipment and ensure plant floor machines are fully operational and reliable, safe, and long-lasting, consider more proactive PMs.

PMs come in many shapes and sizes. Meter readings offer greater PM intelligence. Let's say a piece of equipment has fallen below the acceptable performance threshold, slowing down production and reducing output. Meter trending may show that widget output falls after 600 hrs of continued use, which may exceed the manufacturer's recommendation for replacing components. Meter readings to periodically check production volumes and perform the necessary maintenance tasks trump calendar-based PMs, which remain static as production volumes change over time. And you risk scheduling too few or too frequent PMs that won't parallel the growth of the company.

Another useful PM, condition-based maintenance (CBM), is based on the health of your asset. CMB-based PMs can prevent degradation of components in the equipment. CBM incorporates real-time data about machine health so that maintenance work can be done when it is actually necessary—and not according to a rigid calendar schedule. Monitoring machine health by controlling oil corrosion with a PM to change filters prevents failures.

Checking oil levels, contaminants, temperatures, vibration levels, (among others) all fall under CBMs. A civil engineering company that manages wastewater treatment plants has to regularly test conditions of its centrifugal blowers for alignment, temperatures, vibrations, etc. Each blower has a gearbox with an oil capacity of 27 gal. CBM tests allowed the maintenance team to analyze lab results for detecting metal in the oil, resulting in less frequent oil changes—and lower maintenance costs.

This way the condition of the equipment drives the schedule—not the calendar.

Read more articles by Paul on his blog, Lachance on CMMS.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me