SPS Show: Siemens puts a new face on interfaces

Integrated Automation Portal uses engineering software to allow rapid development and commissioning of automation systems.

11/23/2010


Siemens SPS show

Siemens put a new face on industrial automation interfaces at the SPS Show in Nuremburg, Germany.

The Siemens Totally Integrated Automation Portal uses engineering software to allow rapid development and commissioning of automation systems. Siemens officials at the packed press conference at Nuremburg Messe said the TIA Portal allows deployment of systems much quicker, which will lead to lower development costs. It also stands as the company’s new standard for all future software engineering packages for configuring, programming and commissioning automation and drives products in the Totally Integrated Automation portfolio from Siemens.

“We started with TIA in 1995 to define joint software tools, joint interfaces and to make sure we have data consistency across these interfaces,” said Anton Huber, CEO of Siemens Industry Automation. “A couple of years ago, we started to think of next step we needed to take to help customers deal with their workflow. What we did was to sit with customers and discuss their requirements to find ways to engineer a cost-effective way to optimize workflows.”

According to the Siemens press release, “the TIA Portal framework provides advanced shared services across all the configuration interfaces ensuring uniform navigation for the user and consistent system behavior. For example, all devices and networks in any automation system can now be configured within one shared device and network editor.”

“What is benefit to customer?” Huber said. “With workflow supported engineering, engineering effort goes down dramatically today, and with systems in the future, they can save 25% in hardware and software. Workflow-oriented engineering systems can realize up to 45% cost savings in engineering costs.”

At the same press conference Drive Technology CEO Klaus Helmrich talked about the influence Siemens has had on worldwide drives standards, and the potential of energy savings with industry-wide adoption of drive technology improvements.

“In Germany, industry consumes 47% of the total energy used, and 70% is in motors and drives,” Helmrich said. “In our installed base in Germany, that’s 38 billion kWh, and 24 million tons of CO2.”

“It is not enough to confront our customers that there are components that can help them. It is helping them understand the solution,” he said. “Working together with our customer, we can optimize their energy use. When talk about 35 million installed motors in Germany, this is a field on which we could focus. This does include a lot of savings potential on the operations side. This taps great savings potential for an organization.”

Helmrich pointed to savings of $240,000 at a Kraft Foods plant in Germany, a project that will deliver ROI in less than three years. “People are looking at energy efficiency and optimization. Leading companies are emphasizing this.  Clearly our customers are focusing much more on energy efficiency,” Helmrich said. “We are promoting the integration between drive technology and control technology level.”



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Your leaks start here: Take a disciplined approach with your hydraulic system; U.S. presence at Hannover Messe a rousing success
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Putting COPS into context; Designing medium-voltage electrical systems; Planning and designing resilient, efficient data centers; The nine steps of designing generator fuel systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me