Smart valve positioner boosts gas production
ABB digital positioner stabilizes flow, helps gas separation plant increase argon production by 10%.
A modern digital electro-pneumatic valve positioner from ABB minimizes flowrate swings of rich-liquid vapor at an air separation plant in Louisiana. The new positioner replaces one installed on the actuator of a 20-in. butterfly valve. Tighter control of the flowrate has helped to stabilize the sensitive cryogenic distillation process, increasing argon production by 10%. The plant employs cryogenic fractional distillation to separate air into its major components: nitrogen (78%), oxygen (21%), argon (0.96%).
The plant controls the amount of rich-liquid vapor coming off the argon column, which in turn controls the amount of crude argon flow coming into this column. A 20-in. Jamesbury butterfly valve regulates the flowrate of the rich-liquid vapor, which after installation of TZIDC digital electro-pneumatic positioner from ABB, is now flat and smooth.
The plant manager notes that flatter flowrates establish better system equilibrium, maximizing product purity. The plant can now run the air separation columns under tighter control, which results in production of more argon, estimated at about 10% more.
Visit the Control Engineering Process Control Channel.
Edited by Peter Welander, firstname.lastname@example.org
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.
The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.