Smart Grid standards for interoperability, interconnection, integration
Joining disparate power, IT, and communications systems in developing the Smart Grid.
Standards are an important consideration in the work of building engineers, but their role is increasing with the globally intensifying implementation of the Smart Grid and the revolutionary changes that are being brought about to way that buildings interact with electricity.
There is an array of standards that helps enable interoperability, interconnection and integration of disparate systems as power, IT, and communications are interweaved in the developing Smart Grid. Fortunately, for the sanity of building engineers, there is order to the ways that the various standards produced by different bodies interplay.
For example, say a roof-mounted solar panel is being installed and connected to the grid through an inverter, there are a host of standards that power engineers can look to for guidance, such as Article 690 of NFPA 70: National Electrical Code (NEC) for minimizing electrical hazards in installation and operation, UL 1741 for additional fire and safety considerations with regard to distributed generators, IEEE 1547 “Standard for Interconnecting Distributed Resources with Electric Power Systems” for the basis of the interconnection of the photovoltaic device itself to the power grid, and IEEE 1547.1 “Standard Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems” for commissioning tests.
Systems-level standards are an area of focus for IEEE with regard to the Smart Grid. The IEEE 1547 family of standards, for example, since the base standard’s original publication in 2003, has been steadily updated to reflect evolution in the UL 1741. Work is stirring, in fact, on a new full revision of IEEE 1547, to be completed by 2018. In considering the scope and intentions of a full revision of IEEE 1574, a wide variety of stakeholders are looking at the emerging technologies and applications—microgrids, islanding, inverter communications, ride-through frequencies/voltages, higher renewable penetrations, and synchrophasors, among them—that should be addressed.
IEEE 2030 “Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation with the Electric Power System (EPS), End-Use Applications, and Loads” takes a similar system-of-systems approach.
More than 400 professionals from across the global communications, IT, and power industries collaborated in developing IEEE 2030, and, when it was released in 2011, it established the world’s first interface-by-interface guide to interoperability across the Smart Grid. IEEE 2030 is a technology-agnostic roadmap to the standards and functional interfaces for securely integrating EPS with communications and IT and facilitating data exchange across the Smart Grid.
The Smart Grid is bringing definitive change to the ways that buildings relate with electricity. Whereas most buildings have historically been only consumers of electricity, more and more buildings will also serve as points of power generation in the Smart Grid. And whereas there has been no way and little need to determine when and how much buildings will need at various times of the day/week/month, more precisely understanding and forecasting power demand from and within a building is a frontier of innovation in the Smart Grid.
Standards development driven by the emerging, real-world needs of building engineers will help ensure this transformation is achieved as simply, cost-effectively and efficiently as possible.
In addition to his role as chair of IEEE SCC21 Standards Coordinating Committee on Fuel Cells, Photovoltaics, Dispersed Generation, and Energy Storage, which sponsors and leads the family of standards for IEEE 1547 and IEEE 2030, Dick DeBlasio is a member of the IEEE Standards Board and past member of the IEEE Standards Association Board of Governors and chief engineer with the National Renewable Energy Laboratory.
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey