Smart Grid needs to get smarter

Lights need to stay on even during extreme weather or other types of disasters and new options may soon be available to avoid power-related crises.


ISS SourceLights need to stay on even during extreme weather or other types of disasters and new options may soon be available to avoid power-related crises.

Starting small could keep critical services going, even when the high-voltage grid suffers a crippling blow, said researchers at Carnegie Mellon University. By thinking small like the U.S. military, it is possible to protect power supplies in the event of a massive grid failure. By adopting small, local energy technologies, it is possible to keep services up and running. California Governor Jerry Brown said he wants 12,000 MW of such power supplies in his state.

In the current conditions of the grid, a natural disaster could result in prolonged regional blackouts. To combat future widespread and extended power outages, Carnegie Mellon University researchers created a strategy to use local distributed electricity generation, distribution automation, and smart meters to form small electricity “islands” that would support critical social services in the event of a substantial disruption resulting from extreme weather, terrorism, or other causes.

Distributed generation (DG) collects and distributes electricity from many small energy sources rather than relying on large centralized power facilities. Carnegie Mellon University researchers Anu Narayanan and M. Granger Morgan examined the incremental cost of adding DG units and smart meters to a hypothetical community of 5,000 households covering an area of 5 km.

Under normal operation, large centralized utility generators send electricity along a high-voltage transmission system to a low-voltage distribution system that ultimately delivers power to homes, schools, police stations and other local consumers. An extreme disturbance such as a hurricane can disrupt the high-voltage transmission system and eliminate power to entire regions.

Under the Narayanan and Morgan strategy, electricity circuits would manually or automatically reroute to form isolated energy islands powered by local DG units. To achieve a smart grid DG system, utility companies would need to install smart meters that can efficiently disconnect non-critical loads, add automated components to reroute electricity circuits, and upgrade fault-handling equipment and control software to ensure the smaller grid’s reliability.

Community social services deemed critical during a substantial power outage could include a subset of community grocery stores, gas stations, cellular telephone base stations, streetlights, police stations, and schools.

The researchers said for their model community 350 kW of power would be necessary to continue these services during a blackout, but this limited power supply could cycle between the services. For example, the school could operate in day shifts for elementary, middle, and high school students and then close at night, when the police station could get power at full capacity. Beyond those basic necessities, communities could invest in backup power for water and sewage treatment, traffic lights, and the local jail. Additional arrangements would need to provide for temperature control if a blackout occurred in a region or season that required heating or cooling for basic survival. Most hospitals, airports, and radio and television broadcasting stations already possess independent emergency backup power supplies.

Narayanan and Morgan studied the costs of building regional DG circuits to support critical social services. Scenarios vary based on whether a region has zero, limited, or sufficient existing DG capacity. If enough DG units already exist within a region, the costs include the fee to purchase the options to acquire 350 kW during a blackout. If a region has insufficient existing DG infrastructure, the costs of installing new DG units and providing maintenance are key.

Other considerations include the use of public or private financing options to fund a DG project and the probability of an extended regional blackout. The researchers estimate the cost per household for implementing various DG scenarios would be $9 to $22 per year for risk probabilities ranging from 0.01 to 0.0001. Even the highest cost estimate is far less than 1% of an assumed median household income of $50,000, providing support for switching to DG units. The potential costs to a community resulting from a large power outage also must factor into decisions about whether to invest in these upgrades.

Strategically constructing regional DG circuits may help reduce the effects of catastrophic electricity failure resulting from natural or human-triggered events, ensuring critical services necessary for the health and safety of communities. The researchers said this strategy would best undergo implementation on a statewide or regional level to prevent the influx of citizens from neighboring communities that lack such an emergency power procedure to ensure critical social services.

“There are currently a few obstacles to implementing such a strategy, including state laws that prevent the deployment of cost-effective combined heat and power (CHP) ‘microgrids,’ and the lack of incentive for power companies to invest in such a system,” Narayanan said. “We have the technology to make our critical services less vulnerable to large blackouts. What we need now are the right policy initiatives to make it happen.”

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
2015 Mid-Year Report: Manufacturing's newest tool: In a digital age, digits will play a key role in the plant of the future; Ethernet certification; Mitigate harmonics; World class maintenance
2015 Lubrication Guide: Green and gold in lubrication: Environmentally friendly fluids and sealing systems offer a new perspective
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Cyber security attack: The threat is real; Hacking O&G control systems: Understanding the cyber risk; The active cyber defense cycle
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths
New industrial buildings: Greener, cleaner, leaner; New building designs for industry; Take a new look at absorption cooling; Offshored jobs start to come back

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.