Smart Factory 1.0 is helping China's industry to upgrade

Control Engineering International: China’s “Smart Factory 1.0” proposes that domestic manufacturing equipment should provide digitization and networking, with the third generation of research and development, facilitating concept, innovation, virtual simulation, and rapid prototyping.


The “Smart Factory 1.0” exhibition area at the Industrial Automation Beijing 2013 exhibition. Courtesy: Control Engineering ChinaBuilding on the “Industry 4.0” concept, discussed heavily at the 2013 Hannover industry exhibition and proposed by Germany's government, China has been working on an innovative industrial model called “Smart Factory 1.0.” Some automation companies, research institutes, and system integrators are working to define this innovative industrial model for China's manufacturing, to meet the demands of China's industrial reform.

A group of companies, including Beckhoff Automation, Elco, and E-Cube, are actively involved in the concept’s definition and promotion. The Smart Factory 1.0 concept has proposed a realistic specification for equipment manufacturers and terminal factory users of China.

For equipment manufacturers, Smart Factory 1.0 proposes that domestic manufacturing equipment should provide digitization and networking, with the third generation of research and development, continuing the steps of “concept, innovation, virtual simulation, and rapid prototyping.”

Smart factory technologies

Multiple motors with direct drive, industrial Ethernet, smart sensors, modular hardware, and software also should be widely used in manufacturing equipment. In addition, safety, remote monitoring and diagnosis, and optimization of energy efficiency should be supported.

For terminal factory users, Smart Factory 1.0 proposes using digital network equipment, achieving widespread integration of the automation system of the workshop level and the on-site level. It also proposes that interoperability and information standardization of the main equipment, and flexible production, should be achieved.

Smart Factory 1.0 also suggests that an energy efficiency management system for production equipment and production materials and predictive maintenance should be used as soon as possible.

In China, industrial reform often depends on two motivating factors: government guidance and the needs of industrial users. Smart Factory 1.0 fits with each aspect. While industrial intellectualization and information integration is the main focus of government industrial policy, domestic equipment manufacturers and factory users also are seeking more competitive and economic solutions to cope with increasingly fierce competition.

Practical implementation

Unlike Industry 4.0, Smart Factory 1.0 is not focusing on the most advanced technology but on the practical implementation of existing leading technologies as needed by industries in China. Despite all the automation technologies introduced into the Chinese market for many years, there are big differences in how industries and enterprises apply those technologies.

At the Industrial Automation Beijing 2013 exhibition, Smart Factory 1.0 was shown as an important development. As one of the major promoters of the concept, Jian Wang, the general manager of E-Cube, said, “We hope more people and enterprises can understand and accept the ‘Smart Factory 1.0,’ so they can gain actual economic benefits and high efficiency, and more easily connect to international technology trends.”

- Henry Qiao is an editor, Control Engineering China. Translation from a recent edition of CE China was edited by Mark T. Hoske, content manager, CFE Media, Control Engineering,

ONLINE has other international reports 

Key concepts

  • With China stepping up interconnectivity and digitization efforts, should other areas of the world do the same?


No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.