Smart controller system features electricity savings of 20-50%

The Technology Consortium Limited (TTC) wins InnoVision Technology Award with their high efficiency local processor energy saving system, saving an average 30% of electricity


Following yTTC HELPears of International research, development, trials, and installations, Technology Consortium Limited (TTC) has introduced the H.E.L.P. (High Efficiency Local Processor) energy saving, smart controller system to the North American market. In a recent competition for “…innovative application or development of a technology-based product, process, or service…” a panel of industry judges presented TTC with the InnoVision Technology Award.

By consuming up to seventy percent (70%) of industrial electricity, motors waste more energy than any other electrical device. Motors operate over half of the time where full power is not needed or desired; this wastes energy. The H.E.L.P. System “cycles-down” the motor during periods of reduced demand. This control protocol saves an average of thirty percent of the (kW) electricity used in motorized equipment; with many applications exceeding this efficiency.

The Technology Consortium, Ltd. is the exclusive North American distributer of this new energy savings technology. Their president, Ron Hoffman, recently said, “With the international response and recognition this new technology is receiving, we will soon need to begin our domestic manufacturing. The energy reducing H.E.L.P. System qualifies for state, federal, and utility financial incentives as well as LEED credits. The H.E.L.P. System will soon become the “green” standard for all responsible facilities.”

H.E.L.P. (PDF)

The Technology Consortium Limited (TTC)

- Edited by Gust Gianos, Control Engineering,

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me