Security first; not in smart grid

Development and deployment of smart-grid technology such as intelligent electric meters has outpaced security, setting up a “delicate dance with risk,” said the head of the industry advisory group EnergySec.


“We’re not going to stop the roll-out of the technology, so what do we do when things go wrong?” said EnergySec Chief Executive Patrick Miller. “We’ve got to try to find ways to implement new options in measurement and repair,” that will allow rapid response to failures and breaches.

Miller said installation of equipment already is under way and slowing down to wait for security to catch up is not an option.

“The hackers will outpace that technology,” he said. But risk must undergo intelligent management. “Hope is not a strategy. You should go into this knowing the risks,” and with plans to mitigate and respond to it.

Miller made his comments in the wake of a survey of energy industry security professionals in which large majorities of respondents said that security controls and standards are not keeping pace with the rollout of new equipment.

The Energy Sector Security Consortium (EnergySec) is a non-profit forum for the exchange of security information among asset owners, industry partners and the U.S. government.

The National Institute of Standards and Technology (NIST) has been charged in the Energy Independence and Security Act of 2007 with identifying and developing the technical standards needed to ensure utilities, manufacturers, equipment testers and regulators will be working on the same page.

The agency recently released an updated version of its Framework and Roadmap for Smart Grid Interoperability that identifies technical standards for interoperability, and also is identifying security standards for the industry.

But standards development is a slow process, and 75 percent of the 104 respondents in the survey, done in partnership with the security company nCircle, said no one has adequately addressed security in smart-grid deployment. Seventy-two percent said development of security standards are not keeping pace with deployment and another 61 percent said that security controls on current smart meters are not adequate.

Although a majority of respondents — 53 percent — said there was too much hype on security issues, 70 percent said smart meters and the metering infrastructure, including transport networks, are the most vulnerable to cyber attacks.

Developing standards for the grid took on urgency in 2009 when $4.5 billion became available through the Energy Department in the American Recovery and Reinvestment Act for the development of smart-grid technologies, to modernize existing infrastructure and fund demonstration and deployment programs.

NIST developed a three-phase plan to accelerate the identification of existing standards applicable to the smart grid; establish a Smart Grid Interoperability Panel (SGIP) of government, standards organizations and industry group for the development of the many additional standards needed; and to create a conformity testing and certification infrastructure.

Miller does not fault NIST’s performance.

“The standards-making process is intentionally slow,” he said. “NIST is probably working as fast as NIST could.” But because new networked equipment already is being installed in the energy infrastructure, “somebody is going to have to swallow the reality that innovation will outpace standardization.”

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me