SATA 6 Gb/s Industrial Grade Solid State Drives

The Adlink ASD Series of SSDs has an extended operating temperature range, and is able to withstand high levels of shock and vibration. It will be at the Embedded Systems Conference Chicago, June 6-8, 2011, in Rosemont, IL.


Adlink Technology, Inc will present the Adlink ASD Series of industrial grade solid state drives (SSDs) at the Embedded Systems Conference Chicago from June 6 to 8, 2011, in Rosemont, IL. Adlink ASD SSDs provide a SATA 6 Gb/s (SATA III) interface to match the data transfer capabilities of 2nd generation Intel Core processor-based platforms and have fast read/write speeds.

Adlink industrial grade SSDs deliver low latency with less than 1ms access time, power consumption as low as 2 watts, and high capacity. The Adlink ASD Series is available in 2.5-in., 1.8-in. and Jedec MO297 (Half-Slim) form factors and is designed for use in enterprise, industrial and embedded computing platforms in fields such as defense, telecom, transportation, industrial automation and medical. It supports a wide operating temperature range from -40 °C to 85 °C and is resistant to high levels of shock (1,500G/0.5msec) and vibration 3.08G (7-800Hz). SSDs have no spin-up time, seek time or rotational latency. To provide additional reliability, Adlink ASD Series SSDs implement wear-leveling and hardware error-correcting code (ECC), resulting in years of operation with minimal maintenance and a mean time between failures (MTBF) of up to 2 million hours.

“Our customers depend on Adlink to provide a total solution in a ruggedized format that is able to operate under the most demanding environmental conditions," stated Stephen Huang, Vice President of the Industrial Computing Product Segment of Adlink. "The Adlink industrial grade ASD SSD Series provides customers with the high data transfer rates of the SATA 6 Gb/s interface, high reliability and long product life in an industrial grade storage solution. With these advanced features and leading NAND flash controller technology, Adlink continues to provide customers with high quality solutions and reliable product support. Our new line of industrial grade SSDs meets the requirements of transportation, avionics, factory floor, and other rugged applications with extended temperature requirements.”

Built using high speed SLC/MLC NAND flash with Toggle-Mode and advanced controller technology, the Adlink ASD Series offers high speed performance of up to 470MB/sec sequential read and 385MB/sec sequential write speed (2.5-in. 128 GB SLC). With no moving parts, ASD SSDs are designed to deliver the durability required by portable devices that are frequently dropped or jostled. In addition to the 2.5-in. form factor, the Adlink ASD Series offers models in 1.8-in. form factor with Micro SATA connector and in Half-Slim form factor to provide design flexibility for customers seeking to create next generation ultra-thin rugged devices based on the standard SATA interface. For smoother integration of embedded platforms, the Adlink ASD Series is compatible with the latest Intel-based platforms.

Adlink Technology

- Edited by Gust Gianos, Control Engineering,

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me