Safety system on a fieldbus?

What is fieldbus safety instrumented function technology?


Dear Control Engineering: I was reading the article about safety functions on fieldbus. Is this some sort of specialized fieldbus architecture for safety systems?

The Fieldbus Foundation has been working on its Safety Instrumented Functions (FF-SIF) technology for several years. The project was launched at the request of Foundation fieldbus users who wanted the same networking architecture and ability to access smart diagnostic capabilities on safety devices that they were using for regular process devices.

There are other safety systems that run on fieldbus networks, but FF-SIF has a lot of current development going on and is aimed at heavy process industries such as oil, gas, and petrochemical. In 2009, we published an article Safety via Fieldbus—Hanging by a Wire, that discusses the special requirements of putting safety devices on such a network. Here’s an excerpt from that article:

“At the heart of a safety protocol is the way in which it sends and receives safety messages, rather than the medium that transmits them. Here are the critical functional elements:

“First, the transmission medium is considered a black channel. The safety system doesn’t care how the safety messages are carried—it can be fieldbus, Ethernet, wireless, or whatever, it doesn’t matter. This is the reason protocols often operate on multiple networks.

“Second, the safety system has to detect errors in messages that can normally go undetected. Each safety message uses a cyclical redundancy check (CRC) that can indicate if a message has been corrupted. Fieldbus protocols normally use a frame check sequence (FCS) to verify normal messages; safety applications require more extensive examination added to the basic FCS.

“Third, safety messages have to move through the network in a specific sequence and period of time.

“Erich Janoschek of TÜV Rhineland describes a safety fieldbus network as a specialized mail messaging process. His example of a black channel is the normal way the post office delivers a letter. To make safety messages stand out as special in the normal mail, you could put them in yellow envelopes. ‘If you send the yellow envelopes with normal mail, you cannot say how they’re carried, by airplane or ship or whatever,’ he says. ‘But when the recipient gets a yellow envelope, he can see if it is torn or damaged before accepting it and reading the message. The recipient also knows that a message has to arrive every day, and if the yellow envelope doesn’t arrive, he shuts down the system.’”

Implementing a new networking architecture like FF-SIF depends on having enough equipment available from enough vendors to satisfy the needs of end users. Part of this recent announcement is that new tools are now available for instrumentation and actuator developers who want to make SIF devices. This should help the process along.

--Peter Welander,

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.