Safety first: Put up your guard

Case study: Machine safety culture change at global consumer products manufacturer results in closing of 69% of the major findings from global assessments; 95% of corrective actions and preventive actions from fatalities have been closed.

05/01/2013


Machine safety upgrades offered a manufacturer an opportunity to reduce risk and address operational efficiency when a safety project required equipment overhaul. After risk assessment, and safety culture improvements, many corrective actions and preventive actions were resolved. Safety is more than adding machine guards.

Around the time that the Occupational Safety and Health Act (OSH Act) became effective on April 28, 1971, workplace deaths and reported occupational injuries dropped more than 60%. However, as of January 2012, OSHA reports that the United States still faces an unacceptable and preventable number of work-related deaths, injuries, and illnesses. Every day, more than 12 workers die on the job—more than 4,500 a year, and more than 4.1 million workers suffer a serious job-related injury or illness. A renewed focus on prevention is needed to reduce these numbers.

To accomplish this, the occupational safety and health community has developed and initiated systematic approaches to reduce injuries and illness in the workplace.

Top benefit of an effective workplace safety program is improved productivity. See other benefits. Courtesy: Polytron, January 2012 “OSHA Injury and Illness Prevention Programs White Paper”Regardless of the title of the various company programs, all address workplace safety and health hazards to reduce the extent and severity of work-related injuries and illnesses. Ongoing programs help employers find hazards and fix them before injuries, illnesses, or deaths occur. They also help employers meet their obligation under the OSH Act to “furnish to each of its employees, a place of employment which is free from recognized hazards that are causing or are likely to cause death or serious physical harm to its employees,” according to the January 2012 OSHA Injury and Illness Prevention Programs White Paper.

While return on investment is not the focus with safety, such programs help employers avoid the significant costs associated with injuries and illnesses in the workplace. Even though costs related to injury and illness certainly impact companies, Aberdeen Group’s research finds that the top four pressures driving best-in-class companies are: need to be in compliance (64%); reduce the number of safety injuries/incidents (49%); reduce the risk of an adverse event (22%); and corporate sustainability mandates (18%). That was according to Aberdeen’s November 2011 “Integrated Safety Systems Ensuring Safety and Operational Performance.”

Top safety program benefits

Direct cost of the most disabling workplace injuries in 2008 was reported to be $53 billion, according to Liberty Mutual Research Institute in 2010. And, in 2011, The National Academy of Social Insurance (NASI) estimated that $58 billion in annual workers’ compensation benefits was paid for all compensable injuries and illnesses during 2009.

Injury and illness prevention programs are not new, nor are they untested. Most large companies whose safety and health achievements have been recognized through government or industry awards cite their use of injury and illness prevention programs as their key to success.

Convinced of the value, effectiveness, and feasibility of these programs, many countries around the world now require employers to implement and maintain them. These countries include Canada, Australia, the 27 European Union member states, Norway, Hong Kong, Japan, and Korea. This initiative also follows the lead of 15 U.S. states that have already implemented regulations requiring such programs, according to www.OSHA.gov.

The Ford Motor Company 2010-2011 Sustainability Report comments positively on such efforts: “Improving our safety record is not only good for our employees—it’s good for our business. We have calculated that progress in lost-time cases and days lost saves the company approximately $30 million in direct costs each year.”

Polytron case study on safety

In 2009, one of the leading global consumer products manufacturers launched a new fatality elimination campaign as a part of its existing environmental, health, and safety (EHS) management system. The stated safety goal is zero workplace fatalities by 2015, according to the company’s 2011 Sustainability report.

The overall safety brand was implemented as a strategy to drive cultural change and includes employees, contractors, and visitors. To create a fatality-free and incident-free workplace, the strategy applied a two-way commitment:

1) The company committed to providing a workplace that is compliant with all applicable laws and regulations.

2) Individuals are expected to refuse to take part in any action considered unsafe, confront others acting in an unsafe manner, and immediately stop any unsafe actions.

Key performance indicators (KPI) for the company’s manufacturing facilities were established and defined in the following areas:

  • Total reportable incident rate: Work-related events that result in fatalities, or temporary or permanently disabling injuries or illnesses per 200,000 hours worked per annum.
  • Lost time reportable incident rate: Reportable injuries/illnesses that result in time away from work or restricted work per 200,000 hours worked per annum.
  • Global contact with energized equipment incident rate: Cases resulting from bodily contact with energized equipment (electrical, mechanical, hydraulic, gravity, radiation, pneumatic, thermal, etc.) per 200,000 hours worked per annum. These include incidents arising from inadequate guarding of equipment or machine, or failure to follow energy control work practices, etc.

The company took action in the following areas:

  • Culture change – Training sessions for all employees at the company’s global manufacturing facilities
  • Facility occupational safety and health (OS&H) leader qualification and competency standards – Standard minimum qualifications and competency requirements for senior facility OS&H leaders
  • Machine safety standards – Risk-based approach to safeguarding selection to provide flexibility in safeguarding method(s) in compliance with international consensus standards, ISO 14001, and OHSAS 18001
  • Plan-do-check-adjust (PDCA) methodology – Policy and organization, planning, implementation and operation, checking and corrective action, and management review. 

Plan, do, check, adjust for safety

Plan-do-check-adjust (PDCA), a common methodology also applied in manufacturing programs, including safety, was made popular by Dr. W. Edwards Deming, considered to be the father of modern quality control. Courtesy: PolytronPDCA, a common methodology also applied in manufacturing programs, was made popular by Dr. W. Edwards Deming, considered to be the father of modern quality control. (See graphic.) The steps in each successive PDCA cycle, and the traditional responsibilities are:

Plan – establish the objectives and processes necessary to deliver results in accordance with the expected output (the target or goals).

Do – implement the plan, execute the process, and make the changes. Collect data for charting and analysis in the following “Check” and “Adjust” steps.

Check – study the actual results (measured and collected in “Do” above) and compare against the expected results (targets or goals from the “Plan”) to ascertain any differences. Information is what you need for the next step, “Adjust.”

Adjust – request corrective actions on significant differences between actual and planned results. Analyze the differences to determine root causes. Determine where to apply changes that will include improvement of the process or product. When a pass through these four steps does not result in the need to improve, the scope to which PDCA is applied may be refined to plan and improve with more detail in the next iteration of the cycle, or attention needs to be placed in a different stage of the process.

On next page, see more advice, another graphic, and helpful links.


<< First < Previous 1 2 Next > Last >>

Mohammed , Non-US/Not Applicable, United Arab Emirates, 05/08/13 12:04 AM:

1. Very Good subject.

2. Needs a specific training program.

2. What about ESD
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Leaders Under 40 program features outstanding young people who are making a difference in manufacturing. View the 2013 Leaders here.
The new control room: It's got all the bells and whistles - and alarms, too; Remote maintenance; Specifying VFDs
2014 forecast issue: To serve and to manufacture - Veterans will bring skill and discipline to the plant floor if we can find a way to get them there.
2013 Top Plant: Lincoln Electric Company, Cleveland, Ohio
Case Study Database

Case Study Database

Get more exposure for your case study by uploading it to the Plant Engineering case study database, where end-users can identify relevant solutions and explore what the experts are doing to effectively implement a variety of technology and productivity related projects.

These case studies provide examples of how knowledgeable solution providers have used technology, processes and people to create effective and successful implementations in real-world situations. Case studies can be completed by filling out a simple online form where you can outline the project title, abstract, and full story in 1500 words or less; upload photos, videos and a logo.

Click here to visit the Case Study Database and upload your case study.

Bring focus to PLC programming: 5 things to avoid in putting your system together; Managing the DCS upgrade; PLM upgrade: a step-by-step approach
Balancing the bagging triangle; PID tuning improves process efficiency; Standardizing control room HMIs
Commissioning electrical systems in mission critical facilities; Anticipating the Smart Grid; Mitigating arc flash hazards in medium-voltage switchgear; Comparing generator sizing software

Annual Salary Survey

Participate in the 2013 Salary Survey

In a year when manufacturing continued to lead the economic rebound, it makes sense that plant manager bonuses rebounded. Plant Engineering’s annual Salary Survey shows both wages and bonuses rose in 2012 after a retreat the year before.

Average salary across all job titles for plant floor management rose 3.5% to $95,446, and bonus compensation jumped to $15,162, a 4.2% increase from the 2010 level and double the 2011 total, which showed a sharp drop in bonus.

2012 Salary Survey Analysis

2012 Salary Survey Results

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.